Important
Do not operate the snowthrower if the auger
and the impeller rotate when you disengage the
auger/impeller drive control lever.
Lubricating the Snowthrower
Lightly lubricate all moving parts of the snowthrower after
every 15 operating hours and at the end of the
snowthrowing season.
1
Important
Do not get oil or grease on the rubber wheel
or friction drive plate because the wheel will slip and the
rubber may deteriorate.
m-2679
1.
2.
Stop the engine and wait for all moving parts to stop.
Figure 30
Disconnect the wire from the spark plug and ensure that
the wire does not contact the plug (Fig. 17).
1.
Axle gear
3.
4.
5.
Drain the gasoline from the fuel tank; refer to Emptying
the Fuel Tank on page 25.
Tip the snowthrower forward onto its auger housing and
block it so that it cannot fall.
Remove the 8 bolts that hold the back and the bottom
covers in place and remove the covers (Fig. 29).
1
1
m-3331
Figure 31
7.
Wipe up any excess oil.
1
2
8. Lightly grease the axle gear (Fig. 30).
9.
Wipe up any excess grease.
10.
11.
12.
Install the back and the bottom covers.
Return the snowthrower to its upright position.
Connect the wire to the spark plug.
1
3
m-2682
Figure 29
1.
2.
Bolts
3.
Bottom cover
Back cover
6.
Lightly lubricate the snowthrower with light oil as
shown in Figures 30 and 31.
24
Categories | Snow Blower Manuals, Toro Snow Blower |
---|---|
Tags | Toro 38053, Toro 521, Toro 824 Power Throw |
Model Number | 38053 |
Model Year | 2003 |
Download File |
|
Document Type | Operator's Manual |
Language | English |
Serial Number | 230000001 - 230999999 |
Product Name | 824 Power Throw Snowthrower |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
Product Type | Snowthrower |
Product Series | Snowthrower, Two Stage Intermediate Frame |
Swath | 24 inch |
Discharge | Two Stage |
Engine Manufacturer | Tecumseh |
Engine Motor Model # | HMSK80-155645W |
Engine Motor Size | 8 hp |
Engine Motor Type | 4 Cycle CARB2, EPA2 |
Transmission Speed | 5 Forward/2 Reverse |
Transmission Type | Friction Disc |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5) Lawn and Garden readers have rated Toro 38053 824 Power Throw Snowblower Operators Manual, 2003 5.0 out of 5.0 based on 1 product reviews.
the Toro 824 is a great little piece of machinery