Maintenance
Note: Determine the left and right sides of the machine from the normal operating position.
Recommended Maintenance Schedule
Maintenance Service
Maintenance Procedure
Interval
•
•
Check the engine oil level.1 Refer to Checking the Engine Oil Level on page 19.
Adjust the skids and the scraper.2 Refer to Adjusting the Skids and the Scraper
Initially
on page 19.
•
•
Adjust the speed selector.3 Refer to Adjusting the Speed Selector on page 20.
Inspect and adjust the traction drive belt. Refer to Adjusting the Traction Drive
Belt on page 20.
1
Hour
•
Inspect and adjust the auger/impeller drive belt. Refer to Adjusting the
Auger/Impeller Drive Belt on page 23.
2
Hours
• Change the engine oil. Refer to Changing the Engine Oil on page 25.
•
Inspect and adjust or replace the traction drive belt if necessary. Refer to
Adjusting the Traction Drive Belt on page 20, or to Replacing the Traction Drive
Belt on page 20.
5
Hours
•
Inspect and adjust or replace the auger/impeller drive belt if necessary. Refer to
Adjusting the Auger/Impeller Drive Belt on page 23, or to Replacing the
Auger/Impeller Drive Belt on page 23.
•
Oil and grease the internal moving parts. Refer to Lubricating the Snowthrower
on page 24.
15
25
Hours
Hours
• Change the engine oil. Refer to Changing the Engine Oil on page 25.
•
Inspect and gap the spark plug. Replace it if necessary. Refer to Replacing the
Spark Plug on page 25.
100
Hours
•
•
•
Change the engine oil at the end of the snowthrowing season. Refer to Changing
the Engine Oil on page 25.
Oil and grease the internal moving parts at the end of the snowthrowing season.
Refer to Lubricating the Snowthrower on page 24.
Annually
Drain the gasoline and run the engine to dry out the fuel tank and the carburetor
at the end of the snowthrowing season. Refer to Emptying the Fuel Tank on
page 25.
1
2
3
Check the engine oil level before each use and add oil if necessary.
Adjust the skids and the scraper as needed.
Adjust the speed selector as needed.
Important
Refer to your engine operator’s manual for additional maintenance procedures.
Caution
If you leave the wire on the spark plug, someone could accidently start the engine and seriously
injure you or other bystanders.
Disconnect the wire from the spark plug before you do any maintenance. Set the wire aside so
that it does not accidentally contact the spark plug.
18
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38053, Toro 521, Toro 824 Power Throw |
| Model Number | 38053 |
| Model Year | 2003 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 230000001 - 230999999 |
| Product Name | 824 Power Throw Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower, Two Stage Intermediate Frame |
| Swath | 24 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Motor Model # | HMSK80-155645W |
| Engine Motor Size | 8 hp |
| Engine Motor Type | 4 Cycle CARB2, EPA2 |
| Transmission Speed | 5 Forward/2 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Lawn and Garden readers have rated Toro 38053 824 Power Throw Snowblower Operators Manual, 2003 5.0 out of 5.0 based on 1 product reviews. the Toro 824 is a great little piece of machinery