Use a fuel stabilizer/conditioner regularly during operation
and storage. A stabilizer/conditioner cleans the engine
during operation and prevents gum-like varnish deposits
from forming in the engine during periods of storage.
Controls
The starter handle and the blade control bail are on the
upper handle as shown in Figure 10.
Important
stabilizer/conditioner. Do not use fuel stabilizers with an
alcohol base such as ethanol, methanol, or isopropanol.
Do not use fuel additives other than a fuel
2
1
1.
Clean around the fuel tank cap (Fig. 9).
1
3
m-4207
Figure 10
1626
Figure 9
1.
2.
Blade control bail
Upper handle
3. Starter handle
1.
Fuel tank cap
2.
3.
Remove the cap from the tank.
Starting the Engine
Fill the fuel tank with unleaded gasoline to within 1/4 to
1/2 inch (6 to 13 mm) from the top of the tank. Do not
1.
Connect the wire to the spark plug (Fig. 11).
fill into the filler neck.
4.
Install the fuel tank cap and wipe up any spilled
gasoline.
1
Reviewing the Maintenance
Schedule
2
m-4198
Figure 11
Review the Recommended Maintenance Schedule on
page 14. You may need to perform one or more additional
procedures before or soon after you begin operating the
lawn mower.
1.
Spark-plug wire
2. Primer
2.
Push in the primer 3 times, waiting one second between
each push (Fig. 11).
Note: If the temperature is 55_F (13_C) or below, push in
the primer 5 times, waiting one second between each push.
Operation
Note: Do not use the primer to start a warm engine after a
brief shutdown. However, cool weather may require you to
prime the engine again.
Note: Determine the left and right sides of the machine
from the normal operating position.
Each time before you mow, ensure that the self-propel drive
and the blade control bail operate properly. When you
release the blade control bail, the engine and the blade
should stop. If they do not, contact an Authorized Service
Dealer.
3.
Hold the blade control bail against the upper handle
(Fig. 10).
4. Pull the starter handle lightly until you feel resistance,
then pull it sharply (Fig. 10). Allow the rope to return
to the handle slowly.
Note: If the engine fails to start after 3 attempts, repeat
steps 2 through 4.
Stopping the Engine
Release the blade control bail. Both the engine and the
blade should stop. If they do not stop properly, contact an
Authorized Service Dealer.
10
Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
---|---|
Tags | Toro 20039 |
Model Year | 2004 |
Download File |
|
Document Type | Operator's Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)