Toro 20039 21-Inch Super Recycler Lawn Mower Operators Manual

Important
future staring problems.
Move the blade as little as possible to avoid
2.   Remove the blade bolt, the accelerator, and the blade
(Fig. 23).
4
Inspecting the Blade
Carefully examine the blade for sharpness and wear,
especially where the flat and the curved parts meet
(Fig. 22A). Because sand and abrasive material can wear
away the metal that connects the flat and curved parts of the
blade, check the blade before using the lawn mower. If you
notice a slot or wear (Figs. 22B and 22C), replace the
blade; refer to Removing the Blade on page 18.
1
3
2
1
m-6342
A
Figure 23
1
1.
2.
Blade bolt
3.
4.
Blade
2
Accelerator
Blade driver
B
1
3
Sharpening the Blade
C
File the top side of the blade to maintain its original cutting
angle (Fig. 24A) and inner cutting edge radius (Fig. 24B).
The blade will remain balanced if you remove the same
amount of material from both cutting edges.
4
270
Figure 22
1.
2.
Sail
3.
4.
Wear
Flat part of blade
Slot formed
A
B
2
1
Note: For the best performance, install a new blade before
the cutting season begins. During the year, file down any
small nicks to maintain the cutting edge.
153
mĆ4783
Figure 24
1.
Sharpen at this angle only
2.
Maintain the original
radius here
Danger
A worn or damaged blade can break, and a piece
of the blade could be thrown into the operator’s or
bystander’s area, resulting in serious personal
injury or death.
Balancing the Blade
1.   Check the balance of the blade by placing the center
hole of the blade over a nail or screwdriver shank
clamped horizontally in a vise (Fig. 25).
Inspect the blade periodically for wear or
damage.
Replace a worn or damaged blade.
Removing the Blade
1007
Figure 25
1.
Grasp the end of the blade using a rag or a thickly
padded glove.
Note: You can also check the balance using a commercially
manufactured blade balancer.
2.
If either end of the blade rotates downward, file that end
(not the cutting edge or the end near the cutting edge).
The blade is properly balanced when neither end drops.
18
Product Specification
CategoriesLawn Mower Manual, Toro Lawn Mower Manual
Tags
Model Year2004
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 28 pages
Document TypeOperator's Manual
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website