5. Install the spark plug and torque it to 15 ft-lb (20 Nm).
General Information
6.
7.
8.
Perform the recommended maintenance procedures;
refer to Maintenance on page 14.
1.
2.
3.
Clean the housing. Refer to Cleaning under the Housing
on page 15.
Charge the battery. Refer to Charging the Battery on
page 20.
Clean any dirt and chaff from the cylinder, cylinder
head fins, and blower housing.
Fill the fuel tank with fresh, clean gasoline.
Remove grass clippings, dirt, and grime from the
external parts of the engine, the shrouding, and the top
of the housing.
9. Check the engine oil level. Refer to Checking the
Engine Oil Level on page 15.
4.
5.
6.
Check the condition of the blade. Refer to Maintaining
the Blade on page 17.
10. Connect the wire to the spark plug.
Service the air filter; refer to Servicing the Air Filter on
page 16.
Accessories
Lubricate the self-propel drive; refer to Lubricating the
Self-propel Drive on page 19.
You may purchase the following accessories from an
Authorized Service Dealer:
7.
8.
Tighten all nuts, bolts, and screws.
•
•
•
Dethatcher kit
Side discharge kit
Spark arrestor
Touch up all rusted or chipped paint surfaces with paint
available from an Authorized Service Dealer.
9.
Prepare the battery for storage. Charge the battery for
72
hours to ensure a full charge (refer to Charging the
Battery on page 20), then unplug the battery charger
and store the lawn mower in an unheated area. If you
must store the lawn mower in a heated area, you must
charge the battery every 90 days.
Removing From Storage
Warning
Folding or unfolding the handle improperly can
pinch, stretch, or damage one or more of the
cables. Any pinched, stretched, or damaged cable
may cause an operational failure that results in an
unsafe operating condition.
•
•
Do not pinch, stretch, or damage the cables.
Handle the cables with care when folding or
unfolding the handle.
•
Do not use the lawn mower if one or more of the
cables are pinched, stretched, or damaged.
Contact your Authorized Service Dealer.
1.
Carefully unfold the upper handle until it nests with the
lower handle, then tighten the knobs.
2.
3.
Check and tighten all fasteners.
Remove the spark plug (Fig. 11) and spin the engine
rapidly using the starter to blow the excess oil from the
cylinder.
4.
Clean the spark plug or replace it if it is cracked,
broken, or if the electrodes are worn.
22
| Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
|---|---|
| Tags | Toro 20039 |
| Model Year | 2004 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)