Figure 36
1.
Flange-head bolt (2)
2.
Belt cover
3.
Loosen the belt guide (Figure 37).
Figure 38
1.
2.
Notch in side plate
Spring
3.
Large traction pulley
The spring is under heavy tension and could
injure the you or a bystander if you do not
carefully remove it.
Carefully remove the spring.
8.
9.
Set the snowthrower upright.
Remove the traction drive belt from the engine
pulley and the large traction pulley (Figure 37).
10.
11.
Install a new belt around the large traction pulley.
Figure 37
Loop the belt over the engine pulley, ensuring that
the belt is on the inside of the belt guide (Figure 37).
1.
2.
3.
Idler pulley
4.
5.
6.
Traction drive belt
Belt guide
Engine pulley
12.
13.
Tip the snowthrower forward and block it so that it
cannot fall.
Auger/impeller drive belt
Large auger/impeller
pulley
Hook the spring into the notch in the bottom edge
of the side plate (Figure 38).
4.
Remove the auger/impeller drive belt from the
engine pulley and the large auger/impeller pulley
(Figure 37).
14. Replace the bottom cover with the 4 flange-head
bolts.
5.
6.
Tip the snowthrower forward and block it so that it
cannot fall.
15. Set the snowthrower upright.
16.
Install the auger/impeller drive belt around the large
auger/impeller pulley and engine pulley, ensuring
that the belt is on the inside of the idler pulley and
the belt guide (Figure 37).
Remove the 4 flange-head bolts that secure the
bottom cover to the frame and remove the cover
(Figure 33).
7.
Disconnect the spring from the notch in the bottom
edge of the side plate (Figure 38).
17. Adjust the belt guide so that there is 1/8 inch (3 mm)
of clearance between the auger/impeller drive belt
and the guide, and secure the belt guide when the
auger/impeller drive belt is tight.
22
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38605, Toro Power Max 522 |
| Model Number | 38605 |
| Model Year | 2008 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English, Français |
| Serial Number | 270000001 - 270004504 |
| Product Name | Toro 522 Power Throw Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower, Two Stage Small Frame |
| Swath | 22 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | 21 oz. (.62l) 5w-30 or 10w / API SH or higher |
| Gearbox Lubricant | Auger 5 oz. Lubriplate Mag 1 grease |
| Engine Motor Model # | LH195SA-67435V |
| Engine Motor Size | 22 hp |
| Engine Motor Type | 4 Cycle CARB2, EPA2 |
| Transmission Speed | 3 Forward/1 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)