3.
Thread a flange nut (not the flange locknut) with the
flange down onto the traction rod attached to the
left side of the handle (Figure 4).
Figure 5
1.
Axle pin
2.
Hole in wheel hub and
outer axle hole aligned
Note: If you install tire chains (optional), you must
install the axle pins through the outer axle holes.
Figure 4
1.
Traction rod
Flange nut
3.
4.
Lower traction rod loop
Flange locknut
2.
Installing the Speed Selector
2.
Rod
4.
Position the left side of the handle against the side of
the snowthrower and insert the end of the traction
rod through the lower traction rod loop Figure 4).
1
1
1
Speed selector rod
Cotter pin
5.
Align the holes in the left side of the handle with
the holes in the left side plate, and secure the handle
with 2 cap screws and Belleville washers until they
are finger tight (Figure 3).
Flat washer
Procedure
1.
Pull the speed selector arm (Figure 6) to the most
outward position.
Note: The concave side of the Belleville washer
goes against the outside of the handle.
6.
Align the holes in the right side of the handle with
the holes in the right side plate, and secure the
handle with 2 cap screws and Belleville washers until
they are finger tight.
7.
8.
Ensure that the handles are at the same height, then
tighten the handle fasteners securely.
Slide the wheels outward and insert each axle pin
through the hole in each wheel hub and through the
outer hole of the axle (Figure 5).
Figure 6
1.
Speed selector arm
3. Speed selector rod
2.
Flat washer and cotter pin
8
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38605, Toro Power Max 522 |
| Model Number | 38605 |
| Model Year | 2008 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English, Français |
| Serial Number | 270000001 - 270004504 |
| Product Name | Toro 522 Power Throw Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower, Two Stage Small Frame |
| Swath | 22 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | 21 oz. (.62l) 5w-30 or 10w / API SH or higher |
| Gearbox Lubricant | Auger 5 oz. Lubriplate Mag 1 grease |
| Engine Motor Model # | LH195SA-67435V |
| Engine Motor Size | 22 hp |
| Engine Motor Type | 4 Cycle CARB2, EPA2 |
| Transmission Speed | 3 Forward/1 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)