OPERATION
Ignition Switch (Push/Pull Safety Key)
WARNING: AVOID INJURY. Read and
understand the entire Safety section before
Key Switch has two positions:
1. “Stop” - pulled out
proceeding.
2. "Run" - pushed in
WARNING: To avoid injury to hands and feet,
always disengage clutches, shut off engine,
and wait for all movement to stop before
unclogging or working on snow thrower.
2
NOTE: DO NOT twist key after it is
inserted.
1
Keep hands and feet away from auger and
impeller.
Primer Bulb
CONTROLS AND FEATURES
Pushing the primer bulb in adds fuel for
See Figure 13 for all Controls and Features locations.
easier engine start. Refer to Starting and
Shut Off on page 17.
Dual Handle Interlock
OS1321
When Attachment Clutch and then Traction Drive
Clutch are engaged, the Attachment Clutch will remain
engaged (lever down) if released. To stop attachment,
release Traction Drive Clutch and both clutches will
disengage.
Speed Selector
Position the Speed Selector in the appropriate speed
notch to control forward and reverse travel.
Forward:
(6) Fastest
(1) Slowest
Reverse:
(1) Slow
Traction Drive Clutch - Left Hand Lever
Squeeze the Traction Drive Clutch
Lever against the Handlebar (1) to
2
engage wheel drive for propelling
unit. Forward speed will vary
according to snow depth and
(2) Fast
moisture content.
IMPORTANT: DO NOT change motion from forward to
reverse with clutch engaged. Forward speed can be
changed without declutching.
1
Release lever (2) to stop movement.
OL2701
NOTE: When traveling to or from the
area to be cleared, press down on the handlebars
enough to raise the front of the unit slightly off the
surface. Engage the traction drive clutch without
engaging the attachment drive clutch.
921001
Attachment Clutch - Right Hand Lever
6
1
1
2
921002, 003, 004
Squeeze Attachment Clutch Lever
2
against handlebar (1) to engage
attachment. Release both clutch
levers (2) to disengage power and
apply brake to attachment.
6
1
IMPORTANT: If the belt squeals
when the attachment clutch lever is
engaged, the impeller may be frozen
in the auger housing. Immediately
1
OL2691
release the attachment clutch lever and move the unit
into a heated area to thaw.
1
2
NOTE: If belt squeals when impeller turns freely, see
Attachment Clutch/Brake Adjustment on page 24.
GB - 13
| Categories | Ariens Snow Blower Manuals, Snow Blower Manuals |
|---|---|
| Tags | Ariens 921001, Ariens 921002, Ariens 921003, Ariens 921004, Ariens ST1027LE, Ariens ST1130DLE, Ariens ST824E, Ariens ST924DLE |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | Ariens, Snow Blower |
| Document File Type | |
| Publisher | ariens.com |
| Wikipedia's Page | Ariens |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)