3.
With the attachment clutch disengaged, check
that the attachment idler arm lightly touches the
frame. See Figure 34.
1
4
With the attachment clutch disengaged, check
the attachment idler arm position here. The
attachment idler arm should lightly touch the
frame.
3
1.
2.
3.
Shift Rod
Adjustment Pivot Pin
Speed Selector Lever
2
4.Hairpin
Figure 32
OS7186
ATTACHMENT CLUTCH/BRAKE
ADJUSTMENT
Figure 34
(Figures 33, 34 and 35)
OS7194
4.
Tighten jam nut on the adjustment barrel.
IMPORTANT: IMPROPER ADJUSTMENT
could result in unexpected movement of
auger and impeller causing death or serious
injury. Auger / impeller must stop within 5
seconds when Attachment Clutch/Impeller
Brake lever is released.
Check Attachment Idler Arm Roller Clearance
1.
Place the unit into the service position. Remove
the bottom cover.
2.
With the clutch lever engaged, check the
clearance between the frame and plastic roller on
the lower end of the attachment idler arm. See
Figure 35.
Remove Attachment Cable Slack
1.
2.
Remove the belt cover.
•
If roller is 1/2 in. (12.7 mm) or more from frame,
go to Adjust the Attachment Clutch Cable Spring
Extension on page 25.
Loosen jam nut on cable adjustment barrel, and
then turn the adjustment barrel up or down to
lengthen or shorten cable and remove all cable
slack. See Figure 33.
•
If roller is less than 1/2 in. (12.7 mm) from frame,
loosen idler adjustment nut and move idler closer
to the belt. Tighten adjustment nut and recheck
the roller clearance.
1
2
1.
2.
Adjustment Barrel
Jam Nut
OS7182
OS7184
Figure 33
GB - 24
| Categories | Ariens Snow Blower Manuals, Snow Blower Manuals |
|---|---|
| Tags | Ariens 921001, Ariens 921002, Ariens 921003, Ariens 921004, Ariens ST1027LE, Ariens ST1130DLE, Ariens ST824E, Ariens ST924DLE |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | Ariens, Snow Blower |
| Document File Type | |
| Publisher | ariens.com |
| Wikipedia's Page | Ariens |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)