Ariens Sno Thro 921001 2 3 4 ST824E ST1027LE ST1130DLE ST924DLE Snow Blower Owners Manual

Discharge Chute Control (921002, 003, 004)
Remote Wheel Lock (921002)
IMPORTANT: If chute does not stay in set position,
adjust as directed in SERVICE AND ADJUSTMENTS
on page 21, or repair before operation.
Squeeze and release the remote wheel lock to lock the
left wheel for better traction when throwing snow or to
unlock the left wheel for easier steering.
Rotate the Chute with Discharge Chute Control.
NOTE: The wheel lock will not release when under
load. Do not unlock the wheel while turning. If the
wheel lock will not release, turn the unit slightly left or
right to relieve axle load and release the axle lock.
921002, 003, 004
If remote wheel lock does not lock or unlock properly,
adjust or repair before operation (see Remote Wheel
Lock (921002) on page 21).
Axle Lock Pin (921001)
(Figure 19)
Use the axle lock pin to lock or unlock the right or left
wheel. Lock both wheels to increase traction; unlock
one wheel to allow for easier turning of the unit.
NOTE: Unit will not drive with both wheels unlocked.
921001
Figure 17
OS7105
Wheel Unlocked
IMPORTANT: DO NOT force frozen chute controls. If
frozen, take to warm place until controls are free.
Discharge Chute Crank (921001)
IMPORTANT: If chute does not stay in set position,
adjust as directed in SERVICE AND ADJUSTMENTS
on page 21, or repair before operation.
Rotate the Chute with Discharge Chute Crank.
Axle Lock Pin
Wheel Locked
921001
Figure 19
OS6000
Scraper Blade
Figure 18
OS7106
The scraper blade allows the back of the housing to
keep better contact with the surface being cleared. It
also prevents damage to the housing from normal
wear.
IMPORTANT: DO NOT force frozen chute controls. If
frozen, take to warm place until controls are free.
Heated Handles (921003)
IMPORTANT: DO NOT allow Scraper Blade to wear
too far or Auger/Impeller housing will become
damaged.
Turn the heated handles switch to the
ON (1) position to activate. Turn the
switch to the OFF (2) position to
1
deactivate.
Runners
2
OS1950
The runners control the distance between the scraper
blade and the ground. Adjust runners equally to keep
blade level with the ground. Refer to Pre-Start on
page 16 for recommended settings.
GB - 15
Product Specification
CategoriesAriens Snow Blower Manuals, Snow Blower Manuals
Tags, , , , , , ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 34 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandAriens, Snow Blower
Document File TypePDF
Publisherariens.com
Wikipedia's PageAriens
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website