TRAVELING
TRANSPORT
To travel from one work area to another:
ALWAYS shut off engine, remove key and
drain fuel when transporting unit on a truck or
trailer.
Use extra care when loading or unloading unit
onto trailer or truck.
Secure unit chassis to transport vehicle.
NEVER secure from rods or linkages that
could be damaged.
1.
2.
3.
Set Throttle to "Slow" or "Part-Throttle"
position.
Press down on handlebars enough to
raise front of unit slightly off surface.
Engage wheel drive clutch without
engaging attachment drive clutch.
DO NOT transport machine while engine is
running.
MAINTENANCE
Ariens Dealers will provide any service or
adjustments which may be required to keep
your unit operating at peak efficiency. Should
engine service be required, contact an Ariens
dealer or an authorized engine manufacturer's
service center.
MAINTENANCE SCHEDULE
Service
Each Every Every Yearly
Use 5 hrs. 25
Performed
hrs.
Check
•
•
•
WARNING: AVOID INJURY. Read
and understand Maintenance and
Service and Battery Safety Rules in
Safety section before attempting any
maintenance.
Fasteners
Check
Clutches
Clean Engine
SERVICE POSITION
Check Engine
Oil
•
*
Change
•
•
•
•
•
WARNING: Before tipping unit up
onto housing, remove fuel so no
spills will occur and remove battery
(if equipped). Ensure unit is secure
and will not tip over during
Engine Oil
Check Tire
Pressure
maintenance.
Check Auger
Gearcase
•
•
•
Place unit on a flat level surface. Tip unit
forward onto front of impeller housing for
service. Assure unit is secure and will not tip
over. Strap and clamp onto bench if needed.
General
Lubrication
Battery
Maintenance
MAINTENANCE SCHEDULE
*
After first two hours of operation.
The chart below shows the recommended
maintenance schedule that should be
performed on a regular basis. More frequent
service may be required.
CHECK FASTENERS
Make sure all hardware is tightened properly.
CHECK CLUTCHES
Auger and impeller must stop quickly when
attachment clutch lever is released.
Wheels must stop quickly when traction drive
clutch lever is released.
If clutches do not engage or disengage
properly, adjust or repair before operation (see
Service and Adjustments).
GB - 19
| Categories | Ariens Snow Blower Manuals, Snow Blower Manuals |
|---|---|
| Tags | Ariens 1024, Ariens 1028, Ariens 1128, Ariens 1332, Ariens 1336, Ariens 924116, Ariens 924117, Ariens 924300, Ariens 924505, Ariens 924506, Ariens 924508 |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | Ariens, Snow Blower |
| Document File Type | |
| Publisher | ariens.com |
| Wikipedia's Page | Ariens |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)