OPERATION
Ignition Switch (Push/Pull Safety Key)
WARNING: AVOID INJURY. Read and
understand the entire Safety section before
proceeding.
926016, 017, 500,
501
926021, 022,
WARNING: To avoid injury to hands and feet,
always disengage clutches, shut off engine,
and wait for all movement to stop before
unclogging or working on snow thrower.
Keep hands and feet away from auger and
impeller.
2
1
2
1
CONTROLS AND FEATURES
See Figure 10 for all Controls and Features locations.
Key Switch has two positions:
Dual Handle Interlock
1.
2.
“Stop” - pulled out
"Run" - pushed in
When Attachment Clutch and then Traction Drive
Clutch are engaged, the Attachment Clutch will remain
engaged (lever down) if released. To stop attachment,
release Traction Drive Clutch and both clutches will
disengage.
NOTE: DO NOT twist key after it is inserted.
Ignition Switch (12V start on dash panel)
(926023, 500, 501)
Traction Drive Clutch - Left Hand Lever
Squeeze the Traction Drive Clutch
Lever against the Handlebar (1) to
The ignition switch is operated by a
removable key. It has three positions:
1
2
2
engage wheel drive for propelling
unit. Forward speed will vary
according to snow depth and
3
1.Stop
2.Run
3.Start
OS0232
moisture content.
1
Release lever (2) to stop movement.
Primer Bulb
OL2701
NOTE: When traveling to or from the
area to be cleared, press down on the handlebars
enough to raise the front of the unit slightly off the
surface. Engage the traction drive clutch without
engaging the attachment drive clutch.
Pushing the primer bulb in adds fuel for
easier engine start. Refer to Starting and
Shut Off on page 17.
OS1321
Speed Selector
Attachment Clutch - Right Hand Lever
Position the Speed Selector in the appropriate speed
notch to control forward and reverse travel.
Squeeze Attachment Clutch Lever
2
against handlebar (1) to engage
attachment. Release both clutch
levers (2) to disengage power and
apply brake to attachment.
Forward:
(6) Fastest
(1) Slowest
Reverse:
(1) Slow
6
1
IMPORTANT: If the belt squeals
when the attachment clutch lever is
engaged, the impeller may be frozen
in the auger housing. Immediately
OL2691
(2) Fast
1
IMPORTANT: DO NOT
change motion from
release the attachment clutch lever and move the unit
into a heated area to thaw.
forward to reverse with
clutch engaged. Forward
speed can be changed
without declutching.
1
2
NOTE: If belt squeals when impeller turns freely, see
Attachment Clutch/Brake Adjustment on page 24.
OS1192
GB - 13
| Categories | Ariens Snow Blower Manuals, Snow Blower Manuals |
|---|---|
| Tags | Ariens 926016, Ariens 926017, Ariens 926021, Ariens 926022, Ariens 926023, Ariens 926500, Ariens 926501, Ariens ST11528DLE, Ariens ST11528DLET, Ariens ST1332DLE, Ariens ST1332DLET, Ariens ST1336DLE, Ariens ST9526DLE, Ariens ST9526DLET |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | Ariens, Snow Blower |
| Document File Type | |
| Publisher | ariens.com |
| Wikipedia's Page | Ariens |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)