TROUBLESHOOTING
PROBLEM
PROBABLE CAUSE
CORRECTION
Engine will not
crank/start.
1. Fuel tank is empty.
1. Fill fuel tank.
2.
3.
Fuel shut-off valve closed.
2. Open fuel shut-off valve.
3. Clean area around governor/carburetor.
Build up of dirt and residue around
governor/carburetor.
4.
5.
Key Switch not in run position.
4.
5.
Put Key Switch into run position.
Ignition switch starter circuit not
functioning.
Check for a bad starter or connections.
6.
7.
8.
Battery discharged, wires loose.
Fuse on wiring harness blown.
Electric starter not functioning.
6.
7.
8.
Check battery and connections.
Replace fuse.
Check for a bad starter or connections.
Engine stops.
1. Out of fuel.
1. Fill fuel tank.
2.
3.
Fuel shut-off valve closed.
2. Open fuel shut-off valve.
Mechanical jam in blower rake or
impeller.
3. Turn off engine, remove key, and wait for
all moving parts to stop. Check for and
remove obstruction and repair before
restart.
4.
5.
Polluted fuel supply.
Faulty spark plug.
4. Replace with clean fuel.
5. Replace or clean spark plug.
Engine problems.
1. See Engine Manual.
Does not operate in
Forward / Reverse.
1. Friction disc not adjusted properly.
1. Repair or replace friction disc. See
Friction Disc Replacement on page 29
2.
3.
Traction belt not functioning.
2. Repair or replace traction drive belt. See
Traction Drive Belt Replacement on
page 28
Speed selector not adjusted
properly.
3. Adjust speed selector. See Speed
Selector Adjustment on page 24
Small rubber beads
collect in frame
1. Friction disc wear.
1. Normal friction disc wear. Chunks or
large pieces of rubber mean friction disc
should be checked and replaced as
necessary.
Unit throws snow
poorly or does not
throw snow.
1. Shear bolts broken.
1. Replace shear bolts (see Shear Bolts on
page 22).
2.
Adjust attachment clutch/brake (see on
2.
Attachment clutch/brake not
adjusted properly.
page 24).
3.
Move unit to a warm place to thaw.
3.
4.
Auger is frozen in place.
4. With the engine off and auger
disengaged, check for obstructions and
remove.
Ice or debris is obstructing auger.
5.
Adjust or replace attachment drive belts
(see Attachment Drive Belts
5.
Attachment drive belts slipping,
worn or damaged.
Replacement on page 27).
GB - 31
| Categories | Ariens Snow Blower Manuals, Snow Blower Manuals |
|---|---|
| Tags | Ariens 926016, Ariens 926017, Ariens 926021, Ariens 926022, Ariens 926023, Ariens 926500, Ariens 926501, Ariens ST11528DLE, Ariens ST11528DLET, Ariens ST1332DLE, Ariens ST1332DLET, Ariens ST1336DLE, Ariens ST9526DLE, Ariens ST9526DLET |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | Ariens, Snow Blower |
| Document File Type | |
| Publisher | ariens.com |
| Wikipedia's Page | Ariens |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)