Ariens Sno Thro 926016 17 21 22 23 926500 1 ST DLE DLET Snow Blower Owners Manual

1.
With the clutch lever disengaged, brake pad must
contact attachment belts. With clutch lever
engaged, brake pad must be more than 1/16 in.
(1.6 mm) from belts. If there is more than 1/16 in.
(1.6 mm) gap, go to Check Belt Finger Clearance
on page 26. If there is less than 1/16 in. (1.6 mm)
gap, go to Step 2.
1
3
7/16 – 9/16 in.
(11.1 –- 14.3 mm)
2
OS7185
OS7190
Figure 33
2.
Adjust attachment idler position. See Figure 34.
a. Loosen idler adjustment nut.
1.
2.
3.
Attachment Drive Belts
Brake Shoe and Pad
Attachment Pulley
Minimum of 1/16 in.
(1.6 mm).
b. To increase spring extension, move idler
closer to belts and tighten adjustment nut.
Return to Step 1.
Figure 35
OS7201
c. To decrease spring extension, move idler
away from belts and tighten adjustment nut.
Return to Step 1.
2.
If there is less than 1/16 in. (1.6 mm) gap
between brake pad and belts, follow these steps:
a. To increase brake pad gap, loosen idler
adjustment nut, and move idler away from
belt. Position idler to achieve a 1/16 in. (1.6
mm) minimum brake pad gap and a 1/2 in.
(12.7 mm) minimum gap between the plastic
roller and the frame.
1
2
b. Check the clutch cable spring extension and
adjust as necessary to achieve a 7/16 – 9/16
in. (11.1 – 14.3 mm) spring extension.
4
c. If the cable needed adjustment, recheck gaps
described in step 2a. Repeat steps as
necessary until brake clearance, roller gap
and spring extension are within specified
ranges.
3
6
IMPORTANT: If adjustments cannot be brought into
specified ranges see your Dealer for repairs.
Check Belt Finger Clearance
1.
With clutch lever engaged, the belt finger located
opposite the belt idler must be less than 1/8 in. (3
mm) from belts, but not touching the belts.
1.
Engine Sheave
2
.Attachment Drive Belts
5
3.
4.
5.
6.
Belt Finger
Attachment Belt Idler
Attachment Pulley
Attachment Idler Adjustment Nut
To adjust belt finger, loosen the bolts and move
the finger to the proper position. Tighten the bolts
and recheck the belt finger clearance.
Figure 34
OS7221
Check Attachment Brake
See Figure 35.
GB - 26
Product Specification
CategoriesAriens Snow Blower Manuals, Snow Blower Manuals
Tags, , , , , , , , , , , , ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 36 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandAriens, Snow Blower
Document File TypePDF
Publisherariens.com
Wikipedia's PageAriens
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website