2. Turn the chute gear until the solid pin is
towards the rear of the unit and a
threaded stud aligns with the chute motor
(Figure 7).
Correct Chute Clamp Orientation
Incorrect Chute Clamp Orientation
3. Remove the six (6) nuts and two half rings
(Figure 7).
4. Make sure the three (3) chute clamps on
the chute gear are underneath the
discharge chute flange as shown in
(Figure 8)
5. Install discharge chute on blower housing
with the opening of the discharge chute
facing towards the front of the unit (Figure
9).
6. Install two (2) half rings on unit with six (6)
nuts. Tighten nuts to 120 lbf-in.
1
(13.56
N•m) (Figure 9).
7. Install chute motor cover on chute motor
(Figure 9).
1
2
3
5
2
4
3
1.
2.
Chute Clamp
Chute Gear
3. Discharge Chute
Flange
Figure 8
6
7
5
4
1.
2.
3.
4.
Solid Pin
5. Chute Ring
6. Nut
7. Half Ring
Threaded Stud
Chute Motor
Chute Motor
Cover
Figure 7
1
4
2
3
1.
2.
Discharge Chute
Half Ring
3. Nut
4. Chute Motor
Cover
Figure 9
GB - 11
| Categories | Ariens Snow Blower Manuals, Snow Blower Manuals |
|---|---|
| Tags | Ariens 924124, Ariens 924125, Ariens 924126, Ariens 924127, Ariens 924128, Ariens 924335, Ariens 924336, Ariens 924337, Ariens 924338, Ariens 924516, Ariens 924517, Ariens ST11526DLE, Ariens ST11528DLE, Ariens ST11528LE, Ariens ST1332DLE, Ariens ST1332LE, Ariens ST1336DLE, Ariens ST1336DLE Ariens 924124, Ariens ST926DLE |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | Ariens, Snow Blower |
| Document File Type | |
| Publisher | ariens.com |
| Wikipedia's Page | Ariens |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)