•
In case of internal contact, DO NOT
induce vomiting!
Keep all hardware properly tightened. Check
shear bolts frequently.
Before tipping unit up onto housing, remove
fuel so no spills will occur and remove battery.
Ensure unit is secure and will not tip over
during maintenance.
Maintain or replace safety and instruction
labels, as necessary.
NEVER store unit with fuel in fuel tank, inside
a building where any ignition sources are
present such as hot water heaters, space
heaters, or clothes dryers. Allow the engine to
cool before storing in any enclosure.
ALWAYS keep protective structures, guards,
and panels in good repair, in place and
securely fastened. NEVER modify or remove
safety devices.
Shut off fuel and allow engine to cool
completely before storing in closed area or
covering unit.
DO NOT change engine governor settings or
over-speed engine.
Fumes from engine exhaust can cause injury
or death. DO NOT run engine in an enclosed
area. Always provide good ventilation.
For extended storage, clean unit thoroughly.
See Engine Manual for proper storage.
Use only attachments or accessories designed
for your unit.
ALWAYS maintain unit in safe operating
condition. Damaged or worn out muffler can
cause fire or explosion.
Check components frequently. If worn or
damaged, replace with manufacturer’s
recommended parts.
ASSEMBLY
ASSEMBLY
WARNING: AVOID INJURY. Read
and understand the entire Safety
section before proceeding.
Handlebar and Shift Rod
1. Remove lower wing knobs on handlebar
assembly (Figure 4).
WARNING: Dropping or tipping over
boxed unit could result in personal
injury or damage to unit.
2. Remove upper wing nut and bolt on shift
rod.
3. Loosen upper wing knobs on handlebar.
Tools Required:
4. Loosen lower wing nut and bolt on shift
rod.
•
•
Pliers
Open-End Wrenches: 3/8, 7/16, 1/2, 9/16"
and/or Adjustable Wrench
5. Put speed selector lever into fastest
reverse panel notch.
•
Tire Gauge
6. Rotate handlebar up so wing knob holes
align. Install and tighten all wing knobs.
PACKAGE CONTENTS
7. Install wing nut and bolt removed in step 2
on shift rod and tighten hardware.
1
2
3
4
1.
2.
Sno-Thro Unit
Chute Crank
(Not on 924517)
3. Discharge Chute
4. Literature Pack
with Extra Shear
Bolts
OS1642
Figure 3
GB - 9
| Categories | Ariens Snow Blower Manuals, Snow Blower Manuals |
|---|---|
| Tags | Ariens 924124, Ariens 924125, Ariens 924126, Ariens 924127, Ariens 924128, Ariens 924335, Ariens 924336, Ariens 924337, Ariens 924338, Ariens 924516, Ariens 924517, Ariens ST11526DLE, Ariens ST11528DLE, Ariens ST11528LE, Ariens ST1332DLE, Ariens ST1332LE, Ariens ST1336DLE, Ariens ST1336DLE Ariens 924124, Ariens ST926DLE |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | Ariens, Snow Blower |
| Document File Type | |
| Publisher | ariens.com |
| Wikipedia's Page | Ariens |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)