OPERATION
IMPORTANT: If the belt squeals when the
attachment clutch lever is engaged, the
attachment drive may be frozen. Immediately
release the attachment clutch lever and move
the unit into a heated area to thaw.
WARNING: AVOID INJURY. Read
and understand the entire Safety
section before proceeding.
Ignition Switch (120V or 240V start on
engine)
WARNING: To avoid injury to hands
and feet, always disengage clutches,
shut off engine, and wait for all
movement to stop before unclogging
or working on snow thrower.
Key Switch has two positions:
1. “Stop” - pulled out
2. Run - pushed in
Keep hands and feet away from auger
and impeller.
2
it is inserted.
1
NOTE: DO NOT twist key after
CONTROLS AND FEATURES
OS1431
See Figure 11 for all Controls and Features
locations.
Ignition Switch (12V start on dash
panel)
Dual Handle Interlock
The ignition switch is
operated by a removable key.
It has three positions:
When Attachment Clutch and then Traction
Drive Clutch are engaged, the Attachment
Clutch will remain engaged (lever down) if
released. To stop attachment, release Traction
Drive Clutch and both clutches will disengage.
1
2
3
1. Stop
2. Run
Traction Drive Clutch - Left Hand
Lever
OS0232
3. Start
Primer Bulb
Squeeze the Traction
Drive Clutch Lever
Pushing the primer bulb in adds
fuel for easier engine start.
Refer to Starting and Shut Off.
2
against the Handlebar
(1) to engage wheel
drive for propelling unit.
Forward speed will vary
according to snow depth
and moisture content.
OS1321
Speed Selector
1
The Speed Selector controls the unit travel in a
forward or reverse direction when positioned
in notch of speed.
Release lever (2) to
stop movement.
OL2701
NOTE: When traveling to or from the area to
be cleared, press down on the handlebars
enough to raise the front of the unit slightly off
the surface. Engage the traction drive clutch
without engaging the attachment drive clutch.
Forward:
(6) Fastest
6
(1) Slowest
5
Reverse:
Attachment Clutch - Right Hand Lever
4
(1) Slow
Squeeze Attachment
Clutch Lever against
3
2
1
(2) Fast
2
handlebar (1) to engage
attachment. Release
both clutch levers (2) to
disengage power and
apply brake to
IMPORTANT: DO NOT
change motion from
forward to reverse with
clutch engaged.
Forward speed can be
changed without
declutching.
1
attachment.
1
2
OL2691
OS1192
GB - 14
| Categories | Ariens Snow Blower Manuals, Snow Blower Manuals |
|---|---|
| Tags | Ariens 924124, Ariens 924125, Ariens 924126, Ariens 924127, Ariens 924128, Ariens 924335, Ariens 924336, Ariens 924337, Ariens 924338, Ariens 924516, Ariens 924517, Ariens ST11526DLE, Ariens ST11528DLE, Ariens ST11528LE, Ariens ST1332DLE, Ariens ST1332LE, Ariens ST1336DLE, Ariens ST1336DLE Ariens 924124, Ariens ST926DLE |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | Ariens, Snow Blower |
| Document File Type | |
| Publisher | ariens.com |
| Wikipedia's Page | Ariens |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)