Safety Recommendations
SB2040 Snowblower
Before Operation
1.
Before each use, clear work area of objects such as rocks, toys, wire, sleds, etc., which could be
picked up and thrown.
2.
Keep the snowblower in safe operating condition. Check the following each time before use:
a) All hardware for tightness (refer to the torque table for details).
b) Inspect auger and fan blades for wear or damage. Broken pieces thrown from worn or damaged
auger or fan can cause serious injury.
c) Check for and maintain correct lawn tractor tire pressure. Check tires for cuts or bubbles. Check
wheels for damage or for missing hardware. Repair or replace as required.
d) Check the engine oil level and add oil as required. If oil level falls below the maximum fill mark, do
not run engine.
3.
4.
5.
6.
Do not operate the snowblower without safety devices and shields in place and operating properly.
Use counterweights (purchased separately) for extra traction and proper balance.
Check the lawn tractor brake function frequently. Adjust and service as required.
The lawn tractor is equipped with a safety interlock system, designed to shut off the engine when the
operator leaves the seat while an attachment is running or the parking brake is not engaged. If the
interlock system is not working properly, repair it before operating the snowblower.
Correct any malfunction before using the snowblower or the lawn tractor.
Operation
1.
When starting the lawn tractor engine:
a) Disengage the PTO.
b) Set the parking brake ON
c) Move the shift lever to NEUTRAL.
2.
Remain seated when starting the lawn tractor engine and during operation. Operate with feet flat on
the lawn tractor running boards at all times.
3.
4.
Keep hands, feet, face, hair and clothing away from rotating parts. Stop engine before unclogging chute.
When operating the snowblower:
Disengage the PTO lever, shut off engine, set the parking brake ON, remove the ignition key, and
wait for all moving parts to stop before unclogging discharge chute or auger blades.
5.
Run the snowblower for a few minutes after use to discharge any leftover snow; this will prevent
freeze-up of the auger and/ or fan.
6.
7.
Disengage the PTO lever when transporting to work area, or when the snowblower is not in use.
Be aware of snowblower discharge direction and do not point it at anyone. Do not operate without
discharge deflector in place.
8.
9.
If you strike a foreign object, disengage the PTO, shut off the engine, set the parking brake on, and
remove the ignition key. Inspect for and repair any damage before operating the equipment again.
Never carry passengers. Passengers interfere with safe operation of the snowblower. Passengers
could be struck by foreign objects and/or be thrown from the machine and could be severely injured.
10.
Be sure the area is clear of other people before operation. Stop the machine if anyone enters the
area. Do not operate the machine with children, pets, or other nearby.
22
POP52152
| Categories | Honda Snow Blower Manuals, Snow Blower Manuals |
|---|---|
| Tags | Honda SB2040 |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | Honda, Snow Blower |
| Document File Type | |
| Publisher | hondapowerequipment.com |
| Wikipedia's Page | Honda |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)