MTD 600 Series K Style Snow Blower Owners Manual

Throttle Control
Auger Control
The throttle control is located on the rear  of the engine. It
regulates the speed of the engine and will shut off  the engine
when moved into the STOP position.
Primer
Pressing the primer forces fuel directly
into the engine’s carburetor to aid in cold-
weather starting.
Oil Fill
The auger control is located on the left  handle. Squeeze the
control grip against the handle to engage the augers  and start
snow throwing action. Release to stop.
Engine oil level can be checked and oil added through  the oil fill.
Oil Drain
Drive Control / Auger Clutch Lock
Engine oil can be drained through the oil drain.
Muffler
Engine exhaust exists the engine via  the muffler.
Skid Shoes
Position the skid shoes based on surface  conditions. Adjust
upward for hard-packed snow. Adjust downward when
operating on gravel or crushed rock surfaces.
Electric Starter Outlet
Requires the use of a three-prong  outdoor extension cord and a
120V
power source/wall outlet.
Recoil Starter Handle
The drive control is located on the right handle. Squeeze  the
control grip against the handle to engage the wheel  drive.
Release to stop.
This handle is used to manually start  the engine.
Electric Starter Button
The drive control also locks the auger control  so that you can
operate the chute directional control without  interrupting
the snow throwing process. If the auger control is engaged
simultaneously with the drive control, the operator  can release
the auger control (on the left handle) and the augers  will remain
engaged. Release both controls to stop the  augers and wheel
drive.
Pressing the electric starter  button engages the engine’s electric
starter when plugged into a 120V power  source.
Augers
When engaged, the augers rotate and draw  snow into the auger
housing.
Note: Always release the drive control before changing speeds.
Failure to do so will result in increased wear on your machine’s
drive system.
Chute Assembly
Snow drawn into the auger housing is discharged out the chute
assembly.
Gas Cap
Unthread the gas cap to add gasoline to the fuel tank.
12
sectiOn 4 — cOntrOls  and features
Product Specification
CategoriesMTD Snow Blower Manuals, Snow Blower Manuals
Tags,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 32 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandMTD, Snow Blower
Document File TypePDF
Publishermtdproducts.com
Wikipedia's PageMTD Products
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website