MTD E662H E642E 614E E644E E664F E6A4E Snow Blower Owners Manual

ATTACHING CLUTCH CABLES
(Hardware D)
Chute
Assembly
1.
Thread  the  hex   jam  nuts  all   the  way  up  the
threaded portion of the “Z” ends.
Hex Bolt
2.
Make certain all cables are in the grooves of the
cable roller guides. The roller guides are located
in the lower rear of the unit.  Lift the clutch grip in
the raised (up) position.
3.
Thread the cable onto the threaded portion of the
“Z” end until there is no slack in the cable, but the
cable is NOT tight. Do not overtighten cable. See
Figure 13.
Hex Lock Nut
Chute Flange
Keeper
WARNING: If   cable   is   tightened   so
there  is  tension  on  the  cable  with  the
clutch grip released, the safety features
of the snow thrower may be overridden.
Figure 14  
ATTACHING THE CHUTE CRANK
(Hardware C)
1.
Insert  hex  bolt  through  the  upper  chute  crank
bracket (located on the chute crank).
See Figure 15.
“Z” End
Lock Washer
Hex Nut
Hex Jam
Nut
Hex Bolt
Cable is
Straight
Upper Chute
Crank Bracket
Figure 15  
Figure 13  
2.
3.
Place the hex bolt into the hole provided in the
left handle. Secure with lock washer and hex nut.
Do not tighten at this point.
4.
When correct adjustment is reached, tighten the
hex nut against the cable to lock it in position.
Loosen  the   carriage  bolts  and   hex  lock   nuts
which secure the lower chute crank bracket to the
extension on the left side of the chute assembly.
See Figure 16.
ATTACHING THE CHUTE ASSEMBLY
(Hardware B)
1.
Place  chute  assembly  over  chute  opening,  with
the  opening  in  the  chute   assembly  facing  the
front of the unit.
Carriage Bolts
Hex Lock Nuts
2.
3.
Place chute flange keepers beneath lip of chute
assembly, flat side down.
Insert  hex  bolt  up  through  chute  flange  keeper
and  chute   assembly  as   shown  in  Figure   14.
Secure with hex lock nut.
Lower
Chute
Crank
4.
After assembling all three chute flange keepers,
tighten all nuts and bolts securely, then back off
1/4 turn to allow easier movement.
Bracket
Figure 16  
9
Product Specification
CategoriesMTD Snow Blower Manuals, Snow Blower Manuals
Tags, , , , , ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 32 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandMTD, Snow Blower
Document File TypePDF
Publishermtdproducts.com
Wikipedia's PageMTD Products
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website