MTD Troy-Bilt TB525CS TB575SS 4 Cycle Gas Trimmer Owners Manual

RULES FOR SAFE OPERATION
Move the unit at least 30 feet (9.1 m) from the fueling source and site
before starting the engine. Do not smoke. Keep sparks and open
flames away from the area while adding fuel or operating the unit.
SYMBOL
MEANING
WARNING:
result in injury to yourself and others.  Always follow the
safety precautions to reduce the risk of  fire, electric
shock and personal injury.
Failure to obey a safety warning  can
WHILE OPERATING
•  Never start or run the unit inside a closed  room or building.
Breathing exhaust fumes can be fatal. Operate  this unit only in a
well-ventilated outdoor area.
•  Wear safety glasses or goggles that meet ANSI Z87.1 standards and
are marked as such. Wear ear/hearing protection when operating
this unit. Wear a face or dust mask if the operation is dusty.
CAUTION:
in property damage or personal injury to yourself or to
others. Always follow the safety precautions to reduce
the risk of fire, electric shock and personal injury.
Failure to obey a safety warning may result
Wear heavy long pants, boots, gloves and  a long sleeve shirt. Do
not wear loose clothing, jewelry, short pants,  sandals or go
barefoot. Secure hair above shoulder level.
The cutting attachment shield must always be  in place while
operating the unit as a trimmer. Do  not operate unit without both
trimming lines extended, and the proper line  installed. Do not
extend the trimming line beyond the length  of the shield.
Read the Operator’s Manual and follow all  warnings and safety
instructions. Failure to do so can result  in serious injury to the
operator and/or bystanders.
FOR QUESTIONS, CALL 1-800-828-5500 IN U.S. OR
1-800-668-1238
in CANADA
READ ALL INSTRUCTIONS BEFORE OPERATING
IMPORTANT SAFETY INSTRUCTIONS •
•  This unit has a clutch. The cutting attachment remains  stationary
when the engine is idling. If it  does not, have the unit adjusted by
an authorized service technician.
WARNING:
When using the unit, you must follow the
•  Adjust the handle to your size in order to  provide the best grip.
safety rules. Please read these instructions before
operating the unit in order to ensure the safety of the
operator and any bystanders. Please keep these
instructions for later use.
Be sure the cutting attachment is not  in contact with anything
before starting the unit.
Use the unit only in daylight or  good artificial light.
Avoid accidental starting. Be in the starting  position whenever
pulling the starter rope. The operator and  unit must be in a stable
position while starting. Refer to Starting/Stopping Instructions.
Read the instructions carefully. Be familiar with  the controls and
proper use of the unit.
Do not operate this unit when tired,  ill, or under the influence of
alcohol, drugs, or medication.
Children and teens under the age of  15 must not use the unit,
except for teens guided by an adult.
All guards and safety attachments
before operating the unit.
Inspect the unit before use. Replace damaged  parts. Check for
fuel leaks. Make sure all fasteners are  in place and secure.
Replace parts that are cracked, chipped, or  damaged in any way.
Do not operate the unit with loose  or damaged parts.
Carefully inspect the area before starting the  unit. Remove all
debris and hard or sharp objects such  as glass, wire, etc.
•  Use the right tool. Only use this tool for  its intended purpose.
•  Do not overreach. Always keep proper footing and balance.
•  Always hold the unit with both hands when operating.  Keep a
firm grip on both handles or grips.
•  Keep hands, face, and feet at a distance from all moving parts. Do
not touch or try to stop the cutting attachment when it rotates.
•  Do not touch the engine, gear housing or muffler.  These parts get
extremely hot from operation, even after the  unit is turned off.
must be installed properly
Do not operate the engine faster than the speed needed to cut, trim
or edge. Do not run the engine at high speed when not cutting.
Always stop the engine when cutting is  delayed or when walking
from one cutting location to another.
If you strike or become entangled with a foreign object, stop the engine
immediately and check for damage. Do not operate before repairing
damage. Do not operate the unit with loose or damaged parts.
Be aware of the risk of injury  to the head, hands and feet.
Clear the area of children, bystanders, and  pets. At a minimum,
keep all children, bystanders, and pets outside  a 50 feet (15 m.)
radius; there still may be a risk  to bystanders from thrown
objects. Bystanders should be encouraged to wear  eye
protection. If you are approached, stop the  unit immediately.
Use only 0.095 inch, 2.41 mm diameter original equipment
manufacturer replace-ment line. Never use metal-reinforced line, wire
or rope. These can break off and become dangerous projectiles.
Squeeze the throttle control and check that it returns automatically to
the idle position. Make all adjustments or repairs before using unit.
SAFETY WARNINGS FOR GAS UNITS
Stop the unit, switch the engine to  off, and disconnect the spark
plug for maintenance or repair.
Use only original equipment manufacturer replacement parts  and
accessories for this unit. These are available  from your authorized
service dealer. Use of any unauthorized parts  or accessories
could lead to serious injury to the  user, or damage to the unit,
and void your warranty.
Keep unit clean of vegetation and other  materials. They may
become lodged between the cutting attachment and  shield.
To reduce fire hazard, replace a faulty  muffler and spark arrestor.
Keep the engine and muffler free from  grass, leaves, excessive
grease or carbon build up.
WARNING:
Gasoline is highly flammable, and its
vapors can explode if ignited. Take the following
precautions:
OTHER SAFETY WARNINGS
Never store a fueled unit inside a  building where fumes may
Store fuel only in containers specifically designed  and approved
for the storage of such materials.
Avoid creating a source of ignition for  spilled fuel. Do not start
the engine until fuel vapors dissipate.
Always stop the engine and allow it to cool before filling the fuel
tank. Never remove the fuel tank cap or add fuel when the engine is
hot. Never operate the unit without the fuel cap securely in place.
Loosen the fuel tank cap slowly to relieve any pressure in the tank.
Add fuel in a clean, well-ventilated outdoor  area where there are
no sparks or flames. Remove the fuel  cap slowly, and only after
the engine stops. Do not smoke while  fueling. Wipe up any
spilled fuel from the unit immediately.
reach an open flame or spark.
Allow the engine to cool before storing  or transporting. Be sure
to secure the unit while transporting.
Store the unit in a dry area,  locked up or up high to prevent
unauthorized use or damage, out of the  reach of children.
Never douse or squirt the unit with  water or any other liquid.
Keep handles dry, clean and free from  debris. Clean after each
use, see Cleaning and Storage instructions.
Keep these instructions. Refer to them often  and use them to
instruct other users. If you loan someone  this unit, also loan them
these instructions.
Avoid creating a source of ignition for  spilled fuel. Do not start
the engine until fuel vapors dissipate.
SAVE THESE INSTRUCTIONS
2
Product Specification
CategoriesLawn Mower Manual, MTD Lawn Mower Manuals, MTD Trimmer Manuals, Trimmer Manuals, Troy-Bilt Lawn Mower Manuals
Tags, , ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 52 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandMTD, Lawn Mower
Product TypeWalk Behind Mower
Document File TypePDF
Publishermtdproducts.com
Wikipedia's PageMTD Products
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website