MTD Troy-Bilt TB525ET Trimmer Lawn Mower Owners Manual

MAINTENANCE AND REPAIR INSTRUCTIONS
6.
7.
Pull the line from the outer spool  until the line is tight
2.
3.
Pull the old inner reel with existing  line from the outer
spool.
Insert the ends of the prewound inner  reel line into the
outer spool eyelets (Fig. 28). Push the  new inner reel,
arrow side up, into the outer spool.
against the inner reel (Fig. 24).
Repeat procedures 4-6 with the second piece  of line.
Fig. 24
8.
Hold the outer spool. Wind the inner  reel counterclockwise
until approximately four (4) inches (102 mm)  of line remain
(Fig. 25).
Fig. 28
4.
Hold the inner reel in place and  install the bump knob,
spring and foam seal. Press down and  turn the bump
knob clockwise. Grasp the ends and pull  firmly to release
the line from the holding slots in  the inner reel (Fig. 26).
RELEASING THE INNER REEL
If the SpeedSpool® does not release line  correctly, pull the
ends of the line firmly from the  spool (Fig. 26). If this does not
the release line, follow the Cleaning the  SpeedSpool®
instructions.
CLEANING THE SPEEDSPOOL®
Cleaning the SpeedSpool® may be necessary if:
A jammed or excessive line must be  removed
Fig. 25
The SpeedSpool® becomes difficult to wind or  does not
operate correctly when bumping the head on  the ground
Hold the outer spool, and unscrew the  bump knob
counterclockwise (Fig. 29).
NOTE:  Do  not wind the inner reel before installing the second
piece of line.
1.
9.
If winding the line becomes difficult or  if the line jams, pull
the ends of the line from the  spool (Fig. 26). Continue
winding the inner reel counterclockwise.
Fig. 29
Fig. 26
INSTALLING A PRE-WOUND REEL
Turn the bump knob counterclockwise and remove  the
bump knob, spring and foam seal (Fig.  27).
2.
3.
4.
Pull out the bump knob, spring and  foam seal (Fig. 27).
Pull the inner reel with existing line  from the outer spool.
Remove any existing line from the inner  reel before
cleaning. Remove any debris or grass from  the knob,
spring, inner reel and foam seal. Wash  the inner reel with
warm soapy water (Fig. 30).
1.
Bump Knob
Foam Seal
Spring
Inner Reel
Fig. 27
Inner Reel
Fig. 30
11
Product Specification
CategoriesLawn Mower Manual, MTD Lawn Mower Manuals, MTD Trimmer Manuals, Trimmer Manuals, Troy-Bilt Lawn Mower Manuals
Tags,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 64 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandMTD, Lawn Mower
Product TypeWalk Behind Mower
Document File TypePDF
Publishermtdproducts.com
Wikipedia's PageMTD Products
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website