RULES FOR SAFE OPERATION
•
IMPORTANT SAFETY INSTRUCTIONS •
The purpose of safety symbols is to attract your attention to possible
dangers. The safety symbols, and their explanations, deserve your
careful attention and understanding. The safety warnings do not by
themselves eliminate any danger. The instructions or warnings they
give are not substitutes for proper accident prevention measures.
• Avoid creating a source of ignition for spilled fuel. Do not
start the engine until fuel vapors dissipate.
• Always stop the engine and allow it to cool before filling the
fuel tank. Never remove the fuel tank cap or add fuel when
the engine is hot. Never operate the unit without the fuel
cap securely in place. Loosen the fuel tank cap slowly to
relieve any pressure in the tank.
SYMBOL
MEANING
NOTE: Advises you of information or instructions vital to the
•
Add fuel in a clean, well-ventilated outdoor area where there
are no sparks or flames. Remove the fuel cap slowly, and
only after the engine stops. Do not smoke while fueling.
Wipe up any spilled fuel from the unit immediately.
SAFETY ALERT SYMBOL:
Indicates
danger, warning, or caution. Attention is required in
order to avoid serious personal injury. May be used
in conjunction with other symbols or pictographs.
•
Avoid creating a source of ignition for spilled fuel. Do not
start the engine until fuel vapors dissipate.
operation or maintenance of the equipment.
• Move the unit at least 30 feet (9.1 m) from the fueling source
and site before starting the engine. Do not smoke. Keep
sparks and open flames away from the area while adding
fuel or operating the unit.
DANGER:
Failure to obey a safety warning will
result in serious injury to yourself or to others.
Always follow the safety precautions to reduce the
risk of fire, electric shock, and personal injury.
WHILE OPERATING
• Clear the area of children, bystanders, and pets. At a
minimum, keep all children, bystanders, and pets outside a 50
feet (15 m.) radius; there still may be a risk to bystanders from
thrown objects. Bystanders should be encouraged to wear eye
protection. If you are approached, stop the unit immediately.
WARNING:
Failure to obey a safety warning can
result in injury to yourself and others. Always follow
the safety precautions to reduce the risk of fire,
electric shock, and personal injury.
•
Never start or run the unit inside a closed room or building.
Breathing exhaust fumes can be fatal. Operate this unit only
in a well-ventilated outdoor area.
CAUTION:
Failure to obey a safety warning may
result in property damage or personal injury to
yourself or to others. Always follow the safety
precautions to reduce the risk of fire, electric
shock, and personal injury.
•
Wear safety glasses or goggles that meet ANSI Z87.1
standards and are marked as such. Wear ear/hearing
protection when operating this unit. Wear a face or dust
mask if the operation is dusty.
•
•
Wear heavy long pants, boots, gloves and a long sleeve
shirt. Do not wear loose clothing, jewelry, short pants,
sandals or go barefoot. Secure hair above shoulder level.
The cutting attachment shield must always be in place while
operating the unit as a trimmer. Do not operate unit without
both trimming lines extended, and the proper line installed. Do
not extend the trimming line beyond the length of the shield.
READ ALL INSTRUCTIONS BEFORE OPERATING
WARNING:
When using the unit, the safety rules
must be followed. For your own safety and that of
bystanders, please read these instructions before
operating the unit. Please keep the instructions
safe for later use.
•
This unit has a clutch. The cutting attachment remains
stationary when the engine is idling. If it does not, have the
unit adjusted by an authorized service technician.
Adjust the handle to your size in order to provide the best grip.
Be sure the cutting attachment is not in contact with
anything before starting the unit.
•
Read this operating instruction manual carefully. Be thoroughly
familiar with the controls and the proper use of the equipment.
Know how to stop the unit and disengage the controls quickly.
Do not operate this unit when tired, ill, or under the
influence of alcohol, drugs, or medication.
Children and teens under the age of 15 must not use the
unit, except for teens guided by an adult.
All guards and safety attachments must be installed
properly before operating the unit.
Inspect the unit before use. Replace damaged parts. Check
for fuel leaks. Make sure all fasteners are in place and secure.
Replace parts that are cracked, chipped, or damaged in any
way. Do not operate the unit with loose or damaged parts.
Carefully inspect the area before starting the unit. Remove
all debris and hard or sharp objects such as glass, wire, etc.
•
•
•
•
•
•
•
•
Use the unit only in daylight or good artificial light.
Avoid accidental starting. Be in the starting position whenever
pulling the starter rope. The operator and unit must be in a stable
position while starting. Refer to Starting/Stopping Instructions.
•
• Do not overreach. Always keep proper footing and balance.
• Always hold the unit with both hands when operating. Keep a
Use the right tool. Only use this tool for its intended purpose.
•
firm grip on both handles or grips while cutting head is rotating.
• Keep hands, face, and feet at a distance from all moving
parts. Do not touch or try to stop the cutting attachment
when it rotates.
• Do not touch the engine, gear housing or muffler. These
parts get extremely hot from operation, even after the unit is
turned off.
•
•
Be aware of the risk of injury to the head, hands and feet.
Use only .095 inch, 2.41 mm diameter original equipment
manufacturer replace-ment line. Never use metal-reinforced
line, wire or rope. These can break off and become
dangerous projectiles.
•
Squeeze the throttle control and check that it returns
automatically to the idle position. Make all adjustments or
repairs before using unit.
• Do not operate the engine faster than the speed needed to
cut, trim or edge. Do not run the engine at high speed when
not cutting.
SAFETY WARNINGS FOR GAS UNITS
• Always stop the engine when cutting is delayed or when
walking from one cutting location to another.
WARNING:
Gasoline is highly flammable, and its
•
If you strike or become entangled with a foreign object, stop
the engine immediately and check for damage. Have any
damage repaired before attempting further operations. Do
not operate the unit with loose or damaged parts.
vapors can explode if ignited. Take the following
precautions:
•
Store fuel only in containers specifically designed and
approved for the storage of such materials.
• Stop the unit, switch the engine to off, and disconnect the
spark plug for maintenance or repair.
2
| Categories | Lawn Mower Manual, MTD Lawn Mower Manuals, MTD Trimmer Manuals, Trimmer Manuals, Troy-Bilt Lawn Mower Manuals |
|---|---|
| Tags | MTD TB525ET, Troy-Bilt TB525ET |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | MTD, Lawn Mower |
| Product Type | Walk Behind Mower |
| Document File Type | |
| Publisher | mtdproducts.com |
| Wikipedia's Page | MTD Products |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)