English / USA
To shut down the engine:
:
Push the slide control in direction of
c to $
At very low outside temperatures:
Allow engine to warm up
3
As soon as the engine runs:
:
Blip the throttle trigger to disengage
the starting throttle position – the
slide control moves to the normal
run position # and the engine
returns to idle speed.
2
:
Open throttle slightly – warm up the
engine for a short period.
If the engine does not start:
If you did not turn the choke knob to e
quickly enough after the engine began to
fire, the combustion chamber has
flooded.
B
When the engine begins to fire:
Turn the choke knob to e and
continue cranking.
As soon as the engine runs:
Blip the throttle trigger (2) –
the slide control (3) moves to the run
position # and the engine settles
down to idle speed.
:
:
Stand the unit on the tip of the
auger.
Disengage the auger brake by
moving the activating lever to
position B. Your earth auger is now
ready for operation.
:
:
:
:
Turn the choke knob to e
Set the slide control, trigger
interlock and throttle trigger to the
starting throttle position.
:
Start the engine – pull the starter
rope briskly – 10 to 20 pulls may be
necessary.
Make sure the carburetor is
correctly adjusted – the auger must
not rotate when the engine is idling.
.
Since the auger brake is still
engaged, the engine must be
returned to idle speed immediately
If the engine still does not start:
Push the slide control in direction of
to $
:
–
or the clutch might otherwise be
c
damaged.
16
BT 120 C
Categories | Auger Drill Manuals, Stihl Auger Drill Manuals |
---|---|
Tags | STIHL BT 120 C |
Download File |
|
Document Type | Operator's Manual |
Language | English, Español |
Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Auger |
Document File Type | |
Publisher | stihl.com |
Wikipedia's Page | Stihl |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)