English / USA
Operating Instructions
Throttle cable adjustment
During Break-in Period
:
Check adjustment of throttle cable –
see chapter on "Adjusting the
Throttle Cable".
A factory new machine should not be run
at high revs (full throttle off load) for the
first three tank fillings. This avoids
unnecessary high loads during the
break-in period. As all moving parts
have to bed in during the break-in
period, the frictional resistances in the
engine are greater during this period.
The engine develops its maximum
power after about 5 to 15 tank fillings.
1
If tank has been run completely dry
and then refilled:
:
Press the fuel pump bulb at least
fives times.
Now start the engine.
:
:
:
:
Pull off the spark plug boot (1).
Unscrew and dry off the spark plug.
Open the throttle wide.
:
During Operation
After a long period of full-throttle
operation, allow engine to run for a while
at idle speed so that the heat in the
engine can be dissipated by the flow of
cooling air. This protects engine-
mounted components (ignition,
Pull the starter rope several times
to clear the combustion chamber.
:
Fit the spark plug and connect the
spark plug boot – press it down
firmly.
Move the slide control to START.
:
:
carburetor) from thermal overload.
After Finishing Work
Wait for the engine to cool down. Drain
the fuel Kraftstofftank and store the
machine in a dry place. Check the
tightness of all accessible screws and
nuts (not adjusting screws) at regular
regulars and retighten as necessary.
Move the choke knob to e even if
the engine is cold.
:
Now start the engine.
BT 120 C
17
| Categories | Auger Drill Manuals, Stihl Auger Drill Manuals |
|---|---|
| Tags | STIHL BT 120 C |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Auger |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)