English / USA
Storing the Machine
:
Install the rope rotor as described
under “Replacing the starter rope”.
Tension the rewind spring.
Fit the fan housing.
For periods of about 3 months or longer:
:
:
Remove the drilling tool.
:
:
Drain and clean the fuel tank in a
well-ventilated area.
:
Dispose of remaining fuel and
cleaning solution properly in
accordance with local
6
environmental requirements.
:
Run the engine until the carburetor
is dry, this helps prevent the
carburetor diaphragms sticking
together.
:
:
Thoroughly clean the machine, pay
special attention to the cylinder fins
and air filter.
Store the machine in a dry, high or
locked location – out of the reach
of children and other unauthorized
persons.
:
:
Place the new spring with retaining
frame in position – check that outer
loop (6) is properly engaged.
Use a suitable tool to push spring
into the housing. Apply tool through
the openings (arrows). The frame
slips off in this process.
If the spring pops out of the housing
during installation: Refit it in the
clockwise direction, starting outside and
working inward.
26
BT 45
| Categories | Auger Drill Manuals, Stihl Auger Drill Manuals |
|---|---|
| Tags | STIHL BT 45 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Auger |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)