English / USA
Working Conditions
!
Warning!
Striking something hard in
To reduce the risk of loss of control, be
sure that the power drill gear is set in the
neutral position N. Because the engine
speed at starting throttle is fast enough
for the clutch to drive the drilling tool, the
tool will turn unless the gear is set in the
neutral position.
the earth (or a hard object
in wood), such as a rock
or gravel, may cause the
drilling tool to slow down
suddenly or stop. In such
a situation, some or all of the rotational
force (reactive force) is transferred to the
powerhead of the power drill, which can
cause the control handle powerhead
and assist-handle to rotate suddenly in
oppositely the original direction.
!
Warning!
When you pull the starter grip, don't
wrap the starter rope around your
hands. Do not allow the grip to snap
back, but guide the starter rope slowly to
permit the rope to rewind properly.
Failure to follow this procedure may
result in injury to hand or fingers and
may damage the starter mechanism.
!Warning!
Work carefully in rocky ground or where
other solid objects may be present.
Keep throttle feed pressure to a
minimum. If you feel or hear the drilling
tool strike a solid object, release the
throttle trigger immediately and remove
the object before drilling is continued.
If you cannot set the correct idle speed,
have your STIHL dealer check your
power drill and make proper
Important Adjustments
!
At correct idle speed, the drilling tool
should not rotate. For directions to
adjust idle speed, see the appropriate
section of your owner's manual. To
reduce the risk of injury from a turning
drilling tool do not use a power drill with
incorrect idle speed adjustment.
Warning!
adjustments or repairs.
!Warning!
You should hold your power drill firmly to
control sudden jolts and reactive forces.
Be prepared to release the throttle
completely if the forces become too
great. If reactive forces are not
oppositely the original
controlled, rotation of the handles may
result in severe jerking and loss of
control and may cause the powerhead
or assist handle to strike you
8
BT 45
| Categories | Auger Drill Manuals, Stihl Auger Drill Manuals |
|---|---|
| Tags | STIHL BT 45 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English, EspanĚol |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Auger |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)