English
If you use a shoulder strap or full
harness: Practise removing and putting
down the machine as you would in an
emergency. To avoid damage, do not
throw the machine to the ground when
practising.
Check idle speed setting: The cutting
attachment must not rotate when the
engine is idling with the throttle trigger
released.
Models with loop handle
To reduce the risk of fire, keep hot
exhaust gases and hot muffler away
from easily combustible materials (e.g.
wood chips, bark, dry grass, fuel).
Starting the engine
Start the engine at least 3 meters from
the fueling spot, outdoors only.
Holding and Controlling the Power
Tool
On units with a loop handle and barrier
bar, left hand on loop handle, right hand
on control handle, even if you are left-
handed.
Place the unit on firm ground in an open
area. Make sure you have good balance
and secure footing. Hold the unit
securely. The cutting attachment must
be clear of the ground and all other
obstructions because it may begin to run
when the engine starts.
Always hold the unit firmly with both
hands on the handles.
Make sure you always have good
balance and secure footing.
During Operation
Models with bike handle
Make sure you always have good
balance and secure footing.
Your power tool is a one-person unit. To
reduce the risk of injury from thrown
objects, do not allow other persons
within a radius of 15 meters of your own
position – even when starting.
In the event of impending danger or in
an emergency, switch off the engine
immediately by moving the slide control
/
stop switch to STOP or 0.
To reduce the risk of
injury, avoid contact with
the cutting attachment.
15m (50ft)
Right handle on control handle, left hand
on left handle.
Do not drop start the
power tool – start the
engine as described in
the instruction manual.
Note that the cutting
attachment continues to
run for a short period
after you let go of the
throttle trigger – fly-
wheel effect.
To reduce the risk of personal injury ,
do not allow any other persons within a
radius of 15 meters of your own position.
To reduce the risk of damage to
property, also maintain this distance
from other objects (vehicles, windows).
The correct engine idle speed is
important to ensure that the cutting
attachment stops rotating when you let
go of the throttle trigger.
FS 110, FS 110 R
5
| Categories | Blower Vacuum and Sweeper Manuals, STIHL Trimmer Manuals, Trimmer Manuals |
|---|---|
| Tags | STIHL FS 110 |
| Download File |
|
| Language | English, Français, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Trimmer |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)