STIHL FS 110 Trimmer Owners Manual

English
Turn off the engine. Hold the unit
firmly and wait for the cutting
attachment to come to a standstill.
Using the unit with over-long nylon
cutting lines reduces the motor's
operating speed. The clutch then slips
continuously and this causes
overheating and damage to important
components (e.g. clutch, polymer
housing components) – and this can
increase the risk of injury from the
cutting attachment rotating while the
engine is idling.
To reduce the above-mentioned risks
when using a metal cutting attachment,
never use a metal cutting attachment
with a diameter larger than specified. It
must not be too heavy. It must be
manufactured from materials of
Check condition and tightness, look
for cracks.
Check sharpness.
adequate quality and its geometry must
be correct (shape, thickness).
Replace damaged or dull cutting
attachments immediately, even if
they have only superficial cracks.
To reduce the risk of injury, a metal
cutting attachment not manufactured by
STIHL must not be heavier, thicker,
have a different shape or a diameter
larger than the largest metal cutting
attachment approved by STIHL for this
power tool model.
Clean grass and plant residue off the
cutting attachment mounting at regular
intervals – remove any build up of
material from the cutting attachment and
deflector.
When using metal cutting tools
STIHL recommends the use of original
STIHL metal cutting attachments. They
are specifically designed to match your
model and meet your performance
requirements.
To reduce the risk of injury, shut off
the engine before replacing the cutting
attachment.
Vibrations
Metal cutting attachments rotate at very
high speed. The forces that occur act on
the machine, the attachment and the
material being cut.
Prolonged use of the power tool may
result in vibration-induced circulation
problems in the hands (whitefinger
disease).
Do not continue using or attempt to
repair damaged or cracked cutting
attachments by welding, straightening or
modifying the shape (out of balance).
Sharpen metal cutting attachments
regularly as specified.
No general recommendation can be
given for the length of usage because it
depends on several factors.
This may cause parts of the cutting
attachment to come off and hit the
operator or bystanders at high speed
and result in serious or fatal injuries.
Unevenly sharpened metal cutting
attachments cause out-of-balance
which can impose extremely high loads
on the machine and increase the risk of
breakage.
The period of usage is prolonged by:
Hand protection (wearing warm
gloves)
When using mowing heads
Work breaks
Dull or improperly sharpened cutting
edges can put a higher load on the
cutting attachment and increase the risk
of injury from cracked or broken parts.
Equip the deflector with the additional
components specified in the instruction
manual.
The period of usage is shortened by:
Any personal tendency to suffer
from poor circulation (symptoms:
frequently cold fingers, tingling
sensations).
Use only the deflector with properly
mounted line limiting blade to ensure the
mowing lines are automatically trimmed
to the approved length.
Inspect metal cutting attachments for
cracks or warping after every contact
with hard objects (e.g. stones, rocks,
pieces of metal). To reduce the risk of
injury, remove burrs and other visible
build-ups of material (use a file) because
they may become detached and be
thrown at high speed during operation.
Low outside temperatures.
To reduce the risk of injury, always
turn off the engine before adjusting the
nylon line of manually adjustable
mowing heads
The force with which the handles
are held (a tight grip restricts
circulation).
FS 110, FS 110 R
7
Product Specification
CategoriesBlower Vacuum and Sweeper Manuals, STIHL Trimmer Manuals, Trimmer Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 96 pages
LanguageEnglish, Français, Español
Product BrandSTIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Trimmer
Document File TypePDF
Publisherstihl.com
Wikipedia's PageStihl
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website