English / USA
a
9
135°
b
c
135°
c
A
3
4
2
5
5
1
:
:
Apply a mark (c) to the other side of
the locknut (9) halfway between the
other two marks at about 135° (half
of 270°).
Mounting the Gearbox
:
:
Line up the gearbox so that the
open side of the hook (5) points
vertically downward.
:
Place the machine on the ground so
that it rests on the engine support.
Tighten down the clamp screw
:
Loosen the clamp screw (1) on the
gearbox (2) – do not unscrew it
completely.
Rotate the front end of the drive
firmly.
tube 135° counterclockwise
The two parts of the drive tube and
the gearbox must be in exactly this
position when the drive tube is
separated for transportation of the
machine – see chapter on
(
arrow) until the marks on the front
:
Push the gearbox onto the front end
of the drive tube (3) as far as stop –
the necked area (4) of the drive tube
is then covered.
end of the drive tube (A) and the
locknut (c) are in alignment.
Do not turn the two parts of the drive
tube any further.
"Transporting the Machine".
:
Check swivel range of hook – see
"User Checks and Maintenance".
SP 200
15
| Categories | Stihl Tiller Cultivator Manuals, Tiller Cultivator Manuals |
|---|---|
| Tags | STIHL SP 200 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Tiller Cultivator |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)