English / USA
Cap with grip
Screw cap
!Warning!
!
Warning!
!
Warning!
Check that the spark plug boot is
securely mounted on the spark plug – a
loose boot may cause arcing that could
ignite combustible fumes and cause a
fire.
In order to reduce the risk of fuel spillage
and fire from an improperly tightened
fuel cap, correctly position and tighten
the fuel cap in the fuel tank opening.
Unit vibrations can cause
an improperly tightened
fuel filler cap to loosen or
come off and spill
quantities of fuel. In order
to reduce the risk of fuel
To do this with this STIHL
cap, raise the grip on the
Keep the handles clean and dry at all
times; it is particularly important to keep
them free of moisture, pitch, oil, grease
or resin in order for you to maintain a firm
grip and properly control your power
tool.
spillage and fire, tighten the fuel filler cap
by hand as securely as possible.
top of the cap until it is
upright at a 90° angle.
Insert the cap in the fuel
tank opening with the
Before Starting
!Warning!
triangular marks on the grip of the cap
and on the fuel tank opening lining up.
Using the grip, turn the cap firmly
clockwise as far as it will go (approx. a
quarter turn).
!
To reduce the risk of injury from
breakage and loss of control, never use
your unit if the hook or shaft is damaged
or cracked. Never attempt to repair a
damaged or cracked hook or shaft by
welding or straightening.
Warning!
Always check your power tool for proper
condition and operation before starting,
particularly the throttle trigger, throttle
trigger interlock, stop switch and
Fold the grip flush with the
top of the cap. If the grip
does not lie completely
harness. The throttle trigger must move
freely and always spring back to the idle
position. Never attempt to modify the
controls or safety devices.
flush with the cap and the
detent on the grip does
Adjust the carrying harness and hand
grip to suit your size before starting
work. To be better prepared in case of an
emergency, practice releasing the unit
from the harness as quickly as possible.
not fit in the
!
Warning!
corresponding recess in the filler neck,
the cap is not properly seated and
tightened and you must repeat the
above steps.
Never use a power tool that is damaged
or not properly maintained.
SP 200
7
| Categories | Stihl Tiller Cultivator Manuals, Tiller Cultivator Manuals |
|---|---|
| Tags | STIHL SP 200 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Tiller Cultivator |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)