English / USA
As soon as engine runs
Blip the throttle trigger immediately
:
–
the slide control moves to the run
position# and the engine settles
down to idle speed.
Make sure the carburetor is
correctly adjusted – the hook must
not move when the engine is idling.
Your machine is now ready for
operation.
:
Pull the starter grip slowly with your
right hand until you feel it engage
and then give it a brisk strong pull.
Do not pull out the starter rope all
the way – it might otherwise break.
Do not let the starter grip snap back.
Guide it slowly into the housing so
that the starter rope can rewind
properly.
To shut down the engine
:
Push the slide control to STOP-O.
:
:
At very low outside temperatures
As soon as engine runs:
Continue cranking until engine fires.
:
Blip the throttle trigger to disengage
the starting throttle positiion –
the slide control moves to the run
position# – and the engine settles
down to idle speed.
:
:
Swing the hook so that its side is
parallel to the ground.
Place the unit on the ground: It must
rest securely on the engine support
and the gearbox. Check that the
hook is not touching the ground or
any other obstacles.
When the engine begins to fire
:
:
Turn the choke knob toe
Continue cranking.
:
Open the throttle part way and warm
up engine for a brief period.
:
:
Make sure you have a firm footing.
Hold the unit with your left hand and
press it down firmly – your thumb
should be under the fan housing.
22
SP 200
| Categories | Stihl Tiller Cultivator Manuals, Tiller Cultivator Manuals |
|---|---|
| Tags | STIHL SP 200 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Tiller Cultivator |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)