English / USA
Transporting the Machine
If the engine does not start
Choke knob
If you did not turn the choke knob toe
quickly enough after the engine began to
fire, the combustion chamber has
flooded.
:
:
Open the throttle wide.
Crank the engine several times with
the starter to clear the combustion
chamber.
Refit the spark plug and connect the
spark plug boot – push it down
firmly.
:
:
:
Turn the choke knob toe
:
:
Set the slide control to START
Set slide control, interlock lever and
throttle trigger to starting throttle
position.
Set choke knob toe – even if
engine is cold.
:
Now start the engine.
:
Start the engine by pulling the
starter rope firmly. 10 to 20 pulls
may be necessary.
Throttle cable adjustment
:
Check adjustment of throttle cable –
see "Adjusting the Throttle Cable".
If the engine still does not start
Fuel tank run until dry
:
After refueling, press the fuel pump
bulb at least five times – even if
bulb is still filled with fuel.
The split drive tube enables the machine
to be disassembled for easier
transportation.
10
:
:
Set choke knob according to engine
temperature.
Now start the engine.
Separating the Drive Tubes
:
Disconnect the harness from the
:
:
Push the slide control to STOP-O
Pull off the spark plug boot (10).
carrying rings.
:
Place the machine on the ground so
that it rests on the engine support
and the hook.
:
Turn the hook so that its open side
points vertically downward.
SP 200
23
| Categories | Stihl Tiller Cultivator Manuals, Tiller Cultivator Manuals |
|---|---|
| Tags | STIHL SP 200 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Tiller Cultivator |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)