English / USA
Storing the Machine
User Checks and
Maintenance
For periods of about 3 months or longer:
Visual Inspection
:
Drain and clean the fuel tank in a
well ventilated area.
:
Carry out a full visual inspection of
the whole machine before each use
and after every refueling stop.
:
Dispose of remaining fuel and
cleaning solution properly in
accordance with local
Screws and Nuts
:
environmental requirements.
270°
Check tightness of all accessible
screws and nuts (not adjusting
screws) after about every 25 hours
of operation.
:
:
:
Run engine until carburetor is dry –
this helps prevent carburetor
diaphragms sticking together.
Thoroughly clean the machine – pay
special attention to the cylinder fins
and air filter.
Store the machine in a dry, high or
locked location – out of the reach of
children and other unauthorized
persons.
Important: Check security of drive
tube screw unions – see
"Assembling the Unit".
Checking Swivel Range of Hook
:
Place the machine on the ground so
that it rests horizontally on the
engine support.
:
Turn the front end of the drive tube
between the left and right stops. The
hook must swing through a range of
270°.
It must be possible to swing the hook
equidistant to the right and left from its
vertical centerline. If this is not the case,
repeat the steps described in
"Assembling the Unit".
SP 200
31
| Categories | Stihl Tiller Cultivator Manuals, Tiller Cultivator Manuals |
|---|---|
| Tags | STIHL SP 200 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Tiller Cultivator |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)