5.
(Fig. 12). Remove spring and tank support rod from ma-
chine.
Unhook extension spring from hole in tank support
1
6.
Remove flush tank outlet tube from elbow fitting on
bottom of ball valve (Fig. 13 and 14) (see Quick Discon-
nect Fitting in the General Information section).
7.
Remove flush tank with outlet tube attached from
machine.
2
8.
If necessary, remove outlet tube and check valve
from flush tank (Fig. 14).
Figure 13
1.
Ball valve
2.
Outlet tube location
Installation (Fig. 11)
1.
If removed, attach outlet tube and check valve to
flush tank (Fig. 14). Make sure that check valve is
installed to allow free flow from flush (water) tank (Fig.
15).
1
2.
Position flush tank to machine. Connect flush valve
outlet tube to elbow fitting on bottom of ball valve (Fig.
and 14) (see Quick Disconnect Fitting in the General
Information section).
13
3.
Secure flush tank to machine with tank support rod
and extension spring.
2
4.
with flange head screws (see Tank Support in this sec-
tion).
Return tank support to upright position and secure
3
Figure 14
5.
Secure high tension lead to spark plug.
1.
2.
Flush tank
Outlet tube
3.
Check valve
1
2
Figure 15
1.
Outlet tube from tank
2.
Tube to ball valve
Line Painter 1200
Page 5 – 17
Paint System
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Painter 1200 |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)