Installation (Fig. 13)
1.
Position paint control cable to machine.
2.
Connect paint control cable to paint control lever on
machine handle:
2
4
A. Slide cable end onto paint control lever and se-
cure with hair pin.
1
B. Secure cable to handle assembly with jam nut.
3
C. Make sure that cable boot is positioned over end
of cable.
3.
Connect paint control cable to paint shutoff valve
(Figs. 14):
A. Secure cable clevis to shutoff valve lever with cle-
vis pin and hair pin.
B. Position shutoff valve lever to shutoff valve and
secure with two (2) cotterless pins.
Figure 14
1.
2.
Paint control cable
3.
Paint shutoff valve
Cable boot
Paint shutoff valve lever
4.
C. Position cable to chassis bracket.
D. Tighten cable jam nuts to allow slight cable free-
play. Verify that operator control lever has
1
E. Make sure that cable boot is positioned over end
of cable.
4.
trol lever has from .050” to .100” (1.3 to 2.5 mm) freeplay.
Readjust cable if necessary.
After cable installation, verify that operator paint con-
2
5.
Secure high tension lead to spark plug.
Figure 15
1.
Pivot cotterless pin
2.
Spool cotterless pin
Line Painter 1200
Page 6 – 15
Chassis and Controls
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Painter 1200 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)