Castor Release Cable
2
3
4
1
9
5
6
8
7
6
Figure 8
1.
2.
3.
Castor release lever
Rubber bumper
Traction lever
4.
5.
6.
Cap screw
Flat washer
Flange bushing
7.
8.
9.
Flange nut
Castor release cable
Hair pin
Removal (Fig. 8)
Park machine on a level surface, stop engine, en-
gage parking brake and remove key from the ignition
switch. Remove high tension lead from the spark plug
and position the lead away from the spark plug.
B. Remove hair pin and clevis pin that secure cable
clevis to castor release lever.
1.
C. Slide cable clevis from release lever.
4.
Note routing of castor release cable. Remove cable
from machine.
2.
lever on machine handle:
Disconnect castor release cable from castor release
Installation (Fig. 8)
1.
Position castor release cable to machine.
A. Loosen jam nut that secures cable to handle as-
sembly.
2.
Connect castor release cable to castor release lever
on machine handle:
B. Remove hair pin that retains cable end to castor
release lever.
A. Slide cable end onto castor release lever and se-
cure with hair pin.
C. Slide cable end from castor release lever.
B. Secure cable to handle assembly with jam nut.
3.
Disconnect castor release cable from castor release
detent under front of machine (Figs. 9 and 10):
C. Make sure that cable boot is positioned over end
of cable.
A. Loosen jam nuts that secure cable to chassis
bracket.
Chassis and Controls
Page 6 – 10
Line Painter 1200
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Painter 1200 |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)