CARBURETOR
Assembly
4. Apply one drop of Loctite 242 or equivalent to the
seat threads, and install a new brass inlet fuel
valve seat (see Figure 31).
1.
2.
Install the high speed jet into the fuel nozzle.
If the nozzle has been removed, turn the carburetor
over. Apply one drop of Loctite 242 blue or
equivalent to the nozzle threads, and install the
nozzle assembly into the carburetor body (see
Figure 29).
Figure 31
0893-041
5.
6.
Install a new inlet valve needle and clip on the float.
Install the float assembly with a new float hinge pin
in the bottom of the carburetor. Ensure that the
hinge pin is positioned properly to keep the float
level. The float should be free to move up and
down easily in the carburetor body.
Figure 29
0893-038
3.
Apply one drop of Loctite 242 blue to the threads,
and install the pilot jet (see Figure 30).
7.
Adjust float so height is 1/2 ± .03” (.76 mm) from
bowl flange (gasket not in place) to top of float (see
Figure 32).
Figure 30
0893-030
Figure 32
0893-054
23
Categories | Lawn Mower Manual, Lawn-Boy Lawn Mower Manuals, Toro Lawn Mower Manual |
---|---|
Download File |
|
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)