PIVOTING ZONE START BRAKE
Assembly
6. Operate the blade control bail to verify that the
brake mechanism stops within three (3) seconds.
There is no adjustment needed after this assembly
process is completed. (See Figure 91).
1.
If the brake mounting plate was not removed from
the engine, simply reconnect the grounding lead to
the push-on terminal directly above the ground
strap stop (4) and continue with the reassembly
process.
Note: If the brake mounting plate was removed,
tighten screw (9) to 60 - 70 in. lbs. (6.78 - 7.91
Nm).
2.
3.
4.
Secure the replacement brake plate to the engine
with shoulder screw (7). Tighten it to 90 in. lbs.
(9.2
Nm). Ensure that the brake plate pivots freely.
Slide the cable into the narrow slot on the brake
mounting plate, and then push the cable into the
hole making sure the tabs lock into the bracket.
Figure 91
0891-1
One end of the compression spring has a hook
shape to it; that end hooks over an indentation in
the brake plate. Squeeze the compression spring
(A) and slip it over the cable between the brake
mounting plate and brake plate. (See Figure 90).
B
A
Figure 90
0893-051a
5.
Insert the leaded ball end of the cable into the
vertical slot (B) of the brake plate. (See Figure 90.)
49
| Categories | Lawn Mower Manual, Lawn-Boy Lawn Mower Manuals, Toro Lawn Mower Manual |
|---|---|
| Download File |
|
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)