Checking and Adjusting the Blade Level
Checking Blade Level—
Steel deck models (Toro Recyclers and Lawn-Boy
Silver Series) use spring arms and pins to engage
notches in a plate bolted to the mower housing
(Figure 11).
All Mowers
Checking the blade level involves preparing a suitable
workspace and measuring the distance from one of the
blade tips to a level flat surface at the 12, 3, 6, and
9
o’clock positions.
Preparing the Workspace
Use a straight edge to verify that the workspace is flat.
Do not assume the floor is flat even if it appears to be
so. You will make measurements with a tolerance of
less than 3/16 inch (5mm) (Figure 13). A small dip in a
concrete floor may cause you hours of work trying to
find a problem that isn’t there.
Figure 11
MVC-402X.jpg
Some models (43cm and 48cm models sold in Europe)
use a single lever height of cut system (Figure 12).
Figure 13
MVC-715X.JPG
For smaller product a 4 by 8 foot sheet of 3/4 inch
plywood laid on the floor may assure you of a relatively
flat surface. It is rigid enough to give you a good
surface to measure from and will serve you for all
mowers up to 48 inches wide and with a wheel base
less than about 84 inches. For larger machines you
may need to find a larger level area to verify the blades
are at the correct level.
Figure 12
P2260003.JPG
Riding Mower Overview
Each series of riding mower has it's own method of
suspending the mower assembly. For checking and
adjusting the blade tracking, height of cut, side-to-side
level, and front-to-rear pitch on a given riding mower,
see the subsection that discusses the appropriate
series of riding mower.
4 - 2
Service Dealer’s Guide to Great Quality of Cut
| Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
|---|---|
| Model Year | 2002 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Toro Lawnmower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Product Type | Walk Behind Mower |
| Engine Manufacturer | Briggs & Stratton |
| Engine Motor Type | 2 Cycle, 2 Cycle CARB1, 2 Cycle EPA1, 2 Cycle EPA2, 4 Cycle |
| Transmission Type | Hand Push |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)