Toro Lawn-Boy Quality of Cut Manual, 2002

Checking and Adjusting the Blade Level
260 Series Tractor
There are four mower attachments for the 260 series
tractors. The process for adjusting the 38-inch
(96.5cm) mower is different from that for adjusting the
other mowers, and so it is described separately. The
42-, 48-, and 52-inch (106.6, 121.9, and 132.0cm)
mowers all require the same leveling process, and so
they are covered together. All four mowers require the
same procedure for checking and adjusting blade
tracking.
Figure 52
Hanger bracket
260_38_1.TIF
1.
Bolt
2.
IMPORTANT: If the hanger is rotated to the end of
adjustment on one side and the mower is not level,
adjust the opposite side.
In the 3/4-3 inch (19.0-76.0mm) range, the gage
wheels contact the ground and determine the level.
The blades should be level side to side within 3/16 inch
(4.76mm) (Figure 53).
Figure 51
0318-29.TIF
38-inch (96.5cm) Mower
Adjusting Side-to-Side Level
The mower blades must be level from side to side.
Check the side-to-side level any time you install the
mower or when you see an uneven cut on the lawn.
Before you level the mower, set the air pressure in the
front and rear tires to 12 psi (83kPa).
This mower attachment is adjustable in two ways. One
for higher heights of cut where the mower is suspended
from the chassis and the other for lower positions
where the level and height of cut are determined by the
rear gage wheels.
Figure 53
2.
260_38_2.TIF
Hairpin cotter
1.
Trunnion
In the 3-4 inch (7.6-10.1cm) range, the mower is
suspended from the chassis. The two outside blade
tips should be an equal height from the ground within
3/16
1.
inch (4.76mm). If not, an adjustment is required.
Loosen adjustment bolt on one side of the tractor
and rotate hangar bracket to raise or lower mower
(Figure 52).
2.
After adjusting, tighten the bolt and check
side-to-side level.
4 - 16
Service Dealer’s Guide to Great Quality of Cut
Product Specification
CategoriesLawn Mower Manual, Toro Lawn Mower Manual
Model Year2002
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 57 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameToro Lawnmower
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Product TypeWalk Behind Mower
Engine ManufacturerBriggs & Stratton
Engine Motor Type2 Cycle, 2 Cycle CARB1, 2 Cycle EPA1, 2 Cycle EPA2, 4 Cycle
Transmission TypeHand Push
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website