Checking and Adjusting the Blade Level
1.
Raise attachment lift lever to release pressure on
the gage wheels. Remove the 7/16 inch (10.9mm)
hairpin cotter from the trunnion (Figure 54).
2.
Rotate the bolt on front adjustable link to change
front-to-rear pitch. Turn the bolt clockwise to
shorten the link and raise the front of the mower.
Turn counterclockwise to lower.
3.
When the front-to-rear pitch is correct, tighten the
jam nut. Recheck side-to-side leveling.
42-, 48-, 52-inch (106.6, 121.9, 132.0cm) Mowers
The side-to-level and front-to-rear pitch adjustments for
all these models are the same. However, as you raise
the cutting height, the point at which the rear gage
wheels comes off the ground is different for the 52-inch
(132.0cm) mower. There is an adjustment process
when the mower is suspended. However, if the gage
wheels are on the ground, there is no side-to-side
adjustment. If the mower is not level side-to-side with
the gage wheels on the ground, look for a worn or
damaged wheel or bent gage wheel support (the bar
that connects the gage wheels).
Figure 54
260_38_3.TIF
Hairpin cotter
1.
Trunnion
2.
2.
3.
Rotate trunnion to adjust side-to-side level
adjustment.
With the deck suspended, the height of cut range for
the 42-inch and 48-inch (106.6cm and 121.9cm)
mowers is 2-3/4–4 inches (69.8–101.6mm). For the
After adjusting, secure trunnion with hairpin cotter
and lower attachment lift. Check side-to-side level.
52-inch (132.0cm) mower, it is 3–4
(76-102mm).
inches
Adjusting Front-to-Rear Pitch
The gage wheels on the 42-inch and 48-inch (106.6cm
and 121.9cm) mowers are on the ground in the height
of cut ranges 3/4–2-3/4 inch (19.0–69.8mm). The gage
wheels on the 52-inch (132.0cm) mower are on the
ground in the height of cut ranges 1-1/2–3 inches
(38-76mm).
The front-to-rear pitch should be from 0-1/8 inch
(0- 3.1mm) lower in front. To adjust the front-to-rear
pitch, proceed as follows:
1.
The adjustment link is on the right front corner of
the mower. Loosen the jam nut on the link
(Figure 55).
Figure 55
3.
260_38_4.TIF
1.
2.
Adjustable link
Jam nut
Bolt
Service Dealer’s Guide to Great Quality of Cut
4 - 17
| Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
|---|---|
| Model Year | 2002 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Toro Lawnmower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Product Type | Walk Behind Mower |
| Engine Manufacturer | Briggs & Stratton |
| Engine Motor Type | 2 Cycle, 2 Cycle CARB1, 2 Cycle EPA1, 2 Cycle EPA2, 4 Cycle |
| Transmission Type | Hand Push |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)