SECTION 6: CONTROLS
THROTTLE CONTROL
TRACTION CONTROL CLUTCH
The throttle control is located on the engine. It regu-
lates the speed of the engine. See Figure 20.
(See Figure 21 for Model 602, 642 and 662. See
Figure 22 for Models 614, 644, 664, and 6A4)
The traction control clutch is located on the right
handle. Squeeze the traction control clutch to
engage the wheel drive. Release to stop.
SAFETY IGNITION SWITCH
The ignition key must be inserted in the switch before
the unit will start. Remove the ignition key when
snow thrower is not in use.
CHUTE DIRECTIONAL CONTROL
(See Figure 21 for Model 602, 642 and 662. See
Figure 22 for Models 614, 644, 664, and 6A4)
The chute directional control is located on left hand
side of the snow thrower.
To change the direction in which snow is thrown,
turn chute directional control as follows:
Crank clockwise to discharge to the left.
FUEL SHUT-OFF
VALVE
Closed
The fuel shut-off valve,
located under fuel tank,
controls fuel flow from
tank. (If equipped)
Open
Crank counterclockwise to discharge to the right.
Figure 19
See Figure 19.
Starter
Handle
Auger
Control
Clutch
Traction
Control
Clutch
Ignition
Key
Primer
Choke
Throttle
Shift
Lever
Figure 20
Chute
Directional Control
SHIFT LEVER
Models 602, 642 and 662
(See Figure 21 for Model 602, 642 and 662. See
Figure 22 for Models 614, 644, 664, and 6A4)
The shift lever is located in the center of the handle
panel. The shift lever may be moved into one of six
positions. Run engine with throttle in the fast
position. Use the shift lever to determine ground
speed.
Figure 21
Traction
Control
Clutch
Auger
Control
Clutch
Forward—Five forward speeds: position one (1) is
the slowest; position five (5) is the fastest.
Reverse—One reverse (R) speed.
NOTE: Model 614, 644, 664, and 6A4 has five
forward positions and two reverse.
AUGER CONTROL CLUTCH
Shift
Chute
(See Figure 21 for Model 602, 642 and 662. See
Figure 22 for Models 614, 644, 664, and 6A4)
The auger control clutch is located on the left
handle. Squeeze the auger control clutch against the
handle to engage the augers. Release to stop the
snow throwing action.
Lever
Directional Control
Models 614, 644, 664, and 6A4
Figure 22
11
Categories | MTD Snow Blower Manuals, Snow Blower Manuals, Yard Machines Snow Blower Manuals |
---|---|
Tags | MTD 614E, MTD E602E, MTD E642EE642F, MTD E644E, MTD E662E, MTD E662H, MTD E664F, MTD E6A4E, MTD Snow Blower Manual, Yard Machines 614E, Yard Machines E602E, Yard Machines E642EE642F, Yard Machines E644E, Yard Machines E662E, Yard Machines E662H, Yard Machines E664F, Yard Machines E6A4E |
Download File |
|
Document Type | Owner's Manual |
Language | English |
Product Brand | Yard Machines, 614E, E602E, E642EE642F, E644E, E662E, E662H, E664F, E6A4E, Snow Blower |
Document File Type | |
Publisher | mtdproducts.com |
Wikipedia's Page | MTD Products |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)