Yard Machines E602E E642EE642F E662E E662H 614E E644E E664F E6A4E Snow Blower Owners Manual by MTD

Carriage Bolts
Hex Lock Nuts
ā€œZā€
Hex
Nut
Chute
Directional
Control
Bracket
Cable is
Straight
Figure 14  
2.
Place one flat washer over the end of the chute
directional  control,  then   insert  the  end   of  the
chute  directional   control   into  the   hole  in   the
plastic bushing in the chute bracket. See Figure
15.  Place  the  second  flat  washer  on  the  chute
directional control, and secure with hairpin clip.
Figure 12  
4.
When correct adjustment is reached, tighten the
hex nut against the cable to lock it in position.
ATTACHING THE CHUTE ASSEMBLY
(Hardware B)
Chute Directional
Control
Flat Washer
1.
Place  chute  assembly  over  chute  opening,  with
the  opening  in  the  chute  assembly   facing  the
front of the unit.
2.
3.
Place chute flange keepers beneath lip of chute
assembly, flat side down.
Hairpin Clip
Insert  hex  bolt  up  through  chute  flange  keeper
and  chute   assembly  as   shown  in  Figure   13.
Secure with hex lock nut.
Chute Directional
Control Bracket
Figure 15  
4.
After assembling all three chute flange keepers,
tighten all nuts and bolts securely, then back off
1/4 turn to allow easier movement.
3.
Thread one hex nut onto the eyebolt on the chute
directional control assembly until there is at least
two  inches  of  threads  showing  between  the  nut
and the head of the eyebolt. See Figure 16.
Chute
Assembly
Cup
Side
Crown
Side
Hex Bolt
Left
Handle
Cupped
Washer
Hex Nut
Eyebolt
Hex Lock Nut
2ā€ of
Threads
Hex Nut
Chute Flange
Keeper
Figure 16  
4.
5.
Place the eyebolt into the hole located half way
up  the  left  handle.  Secure  with  cupped  washer
(cupped side against the handle, see inset) See
Figure 16.
Figure 13  
ATTACHING THE CHUTE DIRECTIONAL
CONTROL (Hardware C)
Adjust   the   chute    directional   control   support
bracket (see figure 15) so that the spiral on the
chute  directional  control  fully  engages  the  teeth
on the chute assembly. Tighten the hex nuts on
the   lower    chute    directional   control    bracket
securely. Tighten the hex nuts on the eyebolt.
1.
Loosen the two hex nuts which secure the lower
chute  directional  control  support  bracket  to  the
snow thrower housing. See Figure 14.
9
Product Specification
CategoriesMTD Snow Blower Manuals, Snow Blower Manuals, Yard Machines Snow Blower Manuals
Tags, , , , , , , , , , , , , , , ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 28 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandYard Machines, 614E, E602E, E642EE642F, E644E, E662E, E662H, E664F, E6A4E, Snow Blower
Document File TypePDF
Publishermtdproducts.com
Wikipedia's PageMTD Products
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website