1
4
•
•
Choke (Fig. 14)—Rotate the choke to the On position
to start a cold engine. As engine warms up, gradually
rotate the choke counterclockwise to the Off position.
2
3
Throttle (Fig. 14)—Move the throttle upward to
increase the engine speed; move it downward to
decrease the engine speed. Move the throttle to the Stop
position to stop the engine.
m-4059
Figure 13
•
•
Primer (Fig. 14)—Press the primer to pump a small
amount of gasoline into the engine for improved
cold-weather starting.
1.
2.
Auger/impeller drive
control lever
3.
4.
Speed shift control
Discharge chute control
Traction control lever
Fuel Shutoff Valve (Fig. 15)—Close the valve by
rotating it clockwise. Open the valve by rotating it
counterclockwise. Close the valve when you do not use
the snowthrower.
•
•
Traction Control Lever (Fig. 13)—To engage the
traction (wheel drive), press the lever against the left
handgrip. To stop the traction, release the lever.
Speed Shift Control (Fig. 13)—This control has a
neutral position, four forward speeds, and two reverse
speeds. It also controls the power shifting of the
wheels. To select a speed, move the shift control to the
desired position.
1
2
3
2236
Figure 15
3. Fuel line
Note: Before shifting the gears into or out of reverse, or
when using the Power Shift feature, release the traction
drive control. You man shift between any of the forward
speeds without releasing the traction control lever.
1.
2.
Fuel shutoff valve
Hose clamp
•
Chute Deflector Handle (Fig. 16)—Move the deflector
handle forward to move the snow stream down and
rearward to move the snow stream up.
•
•
Discharge Chute Control (Fig. 13)—Rotate the
discharge chute control clockwise to move the
discharge chute to the right; counterclockwise to move
the chute to the left.
1
2
Auger/Impeller Lockup—When you press both the
auger/impeller drive control lever and traction control
lever, the traction control lever locks the auger/impeller
drive control lever down. Release the traction control
lever to release both levers.
176
Figure 16
•
Ignition Switch (Fig. 14)—Insert the key before
starting the engine. To stop the engine, remove the key.
1.
Deflector handle
2. Discharge chute
•
Recoil Starter (Fig. 17)—The recoil starter is on the
back side of the engine. Pull the recoil starter to start the
engine.
4
1
3
2
1
m-4034
934
Figure 14
1.
2.
Ignition switch
Choke
3.
4.
Throttle
Primer
Figure 17
1.
Recoil starter
13
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 1028 Power Shift, Toro 1332 Power Shift, Toro 38547, Toro 38560, Toro 38592, Toro 924 Power Shift |
| Model Number | 38547, 38560 and 38592 |
| Model Year | 2002 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 220000001 - 220999999 |
| Product Name | Toro 924 Power Shift Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Two Stage Power Shift |
| Swath | 24 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | 26 oz. (.8l) 5w-30 or 10w / API SH or higher |
| Engine Motor Model # | OHSK90-221413C |
| Engine Motor Size | 9 hp |
| Engine Motor Type | 4 Cycle CARB1, EPA1 |
| Transmission Speed | 4 Forward/2 Reverse |
| Transmission Type | Gear |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)