3
1
2
473
Figure 24
m-4060
Figure 22
1.
2.
Inner axle hole
3.
Axle pin
Outer axle hole and wheel
hub
3.
Fully engage the traction drive lever to move the wheels
into the alternate position (Figs. 22 and 23).
Note: When shifting, you may need to slightly raise the
handle assembly to assist the wheel movement.
Operating the Differential
For maximum maneuverability, leave the differential in the
unlocked position. When you need additional traction, shift
the differential to the locked position.
Important
Ensure that the snowthrower is not on a
steep slope or an incline when performing this procedure.
1.
Move the wheels to the rear position. Refer to decal
63-9390 in Safety and Instruction Decals on page 6
179
Figure 23
and to Operating the Power Shift Feature on page 15.
2.
3.
Shift the speed shift control to the N (Neutral) position.
4.
Release the speed shift control.
Push lightly on the release tab of the lock spring to
disengage it from the shaft groove, and slide the
coupling to the desired position.
Note: To shift the wheels manually when the engine is not
running, follow steps 1 and 2 and then lift up on the
handles to unlock the wheels.
•
Locked position—Slide the coupling lock spring
into the left-hand shaft groove (Fig. 25).
Freewheeling or Self-propel
Drive
3
You can operate the snowthrower with the self-propel
feature engaged or disengaged (freewheeling). When you
insert the axle pins through the outer axle holes and not
through the wheel hubs (Fig. 24), the snowthrower
freewheels. When you insert the axle pins through the holes
in the wheel hubs and the inner axle holes (Fig. 24) and
engage the traction control lever, the snowthrower propels
itself.
1
2
4
5
6
2163
Figure 25
1.
2.
3.
Differential
Coupling
4.
5.
Lock spring
Right-hand shaft groove
(unlocked position)
Left-hand shaft groove
(locked position)
6.
Release tab—lock spring
16
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 1028 Power Shift, Toro 1332 Power Shift, Toro 38547, Toro 38560, Toro 38592, Toro 924 Power Shift |
| Model Number | 38547, 38560 and 38592 |
| Model Year | 2002 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 220000001 - 220999999 |
| Product Name | Toro 924 Power Shift Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Two Stage Power Shift |
| Swath | 24 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | 26 oz. (.8l) 5w-30 or 10w / API SH or higher |
| Engine Motor Model # | OHSK90-221413C |
| Engine Motor Size | 9 hp |
| Engine Motor Type | 4 Cycle CARB1, EPA1 |
| Transmission Speed | 4 Forward/2 Reverse |
| Transmission Type | Gear |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)