Maintenance
Note: Determine the left and right sides of the machine from the normal operating position.
Recommended Maintenance Schedule
Maintenance Service
Maintenance Procedure
Interval
•
•
Check the engine oil level.1 Refer to Checking the Engine Oil Level on page 19.
Check the auger gearbox oil level and add oil if necessary. Refer to Checking the
Auger Gearbox Oil Level on page 19.
Initially
•
Adjust the skids and the scraper.2 Refer to Adjusting the Skids and the Scraper
on page 19.
•
•
Inspect and adjust the traction drive belt. Refer to Adjusting the Traction Drive
Belt on page 20.
1
Hour
Inspect and adjust the auger/impeller drive belt. Refer to Adjusting the
Auger/Impeller Drive Belt on page 20.
2
Hours
• Change the engine oil. Refer to Changing the Engine Oil on page 22.
•
Inspect and adjust or replace the traction drive belt if necessary. Refer to
Adjusting the Traction Drive Belt on page 20, or to Replacing the Drive Belts on
page 21.
5
Hours
•
Inspect and adjust or replace the auger/impeller drive belt if necessary. Refer to
Adjusting the Auger/Impeller Drive Belt on page 20, or to Replacing the Drive
Belts on page 21.
•
Check the auger gearbox oil level and add oil if necessary. Refer to Checking the
Auger Gearbox Oil Level on page 19.
10
15
Hours
Hours
• Lubricate the drive chain. Refer to Lubricating the Drive Chain on page 23.
•
•
Change the engine oil. Refer to Changing the Engine Oil on page 22.
25
Hours
Inspect and adjust the drive chain if necessary. Refer to Adjusting the Drive
Chain on page 23.
•
•
Inspect and gap the spark plug. Replace it if necessary. Refer to Replacing the
Spark Plug on page 24.
100
Hours
Check the auger gearbox oil level after removing the snowthrower from storage
and add oil if necessary. Refer to Checking the Auger Gearbox Oil Level on
page 19.
•
Change the engine oil at the end of the snowthrowing season. Refer to Changing
the Engine Oil on page 22.
Annually
•
•
Lubricate the drive chain. Refer to Lubricating the Drive Chain on page 23.
Drain the gasoline and run the engine to dry out the fuel tank and the carburetor
at the end of the snowthrowing season. Refer to Emptying the Fuel Tank on
page 24.
1
2
Check the engine oil level before each use and add oil if necessary.
Adjust the skids and the scraper as needed.
Important
Refer to your engine operator’s manual for additional maintenance procedures.
18
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 1028 Power Shift, Toro 1332 Power Shift, Toro 38547, Toro 38560, Toro 38592, Toro 924 Power Shift |
| Model Number | 38547, 38560 and 38592 |
| Model Year | 2002 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 220000001 - 220999999 |
| Product Name | Toro 924 Power Shift Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Two Stage Power Shift |
| Swath | 24 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | 26 oz. (.8l) 5w-30 or 10w / API SH or higher |
| Engine Motor Model # | OHSK90-221413C |
| Engine Motor Size | 9 hp |
| Engine Motor Type | 4 Cycle CARB1, EPA1 |
| Transmission Speed | 4 Forward/2 Reverse |
| Transmission Type | Gear |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)