DESCRIPTION
Skids
QTY.
USE
2
2
2
3
1
Flange-head bolts—3/4 in. (1.9 cm)
Flat washers
Installing the skids
Locknuts
Ignition key
Starting and stopping the engine
Installing the Auger/Impeller
Housing
1
1.
Remove the two flange-head bolts that secure the idler
pulley assembly to the engine frame, and remove the
idler pulley assembly (Fig. 2).
1
mĆ5009
2
Figure 3
2
1.
Latch arm
2. Latch rod
3 4
5
163
9.
Pull up on the axle while holding in the latch arm
(Fig. 3).
Figure 2
1.
2.
3.
Idler pulley assembly
4.
5.
Engine frame
Auger housing
10.
11.
Continue pulling the axle forward until the latch rod
springs into the locked position (Fig. 3).
Flange-head bolts
Impeller pulley
Install the lower belt cover on the underside of the
auger/impeller housing and the engine frame with two
1/2-inch (1 millimeter) flange-head bolts (Fig. 4).
Important
Remove the idler pulley assembly to
prevent damaging it.
2.
3.
4.
5.
6.
7.
8.
Align the holes in the auger/impeller housing with the
holes in the engine frame (Fig. 2).
Route the auger/impeller drive belt around the impeller
pulley (Fig. 2).
3
1
2
Secure the auger/impeller housing to the engine frame
with six 3/4-inch (1.9 centimeters) flange-head bolts.
164
Install the idler pulley assembly, aligning the idler
pulleys with the belts (Figs. 2 and 31).
Figure 4
1.
2.
Flange-head bolt (2)
Mounting tabs
3.
Lower belt cover (shown
from bottom)
Tip the snowthrower up on the front edge of the
auger/impeller housing, and block it in place.
Note: Position the belt cover mounting tabs to the rear
Move the wheels to the rear position. Refer to
Operating the Power Shift Feature on page 15.
of the engine frame member.
12.
13.
Lower the snowthrower onto its wheels.
Push the latch arm to release the axle (Fig. 3).
Check the adjustment of the impeller cable; refer to
steps 4 through 8 of Adjusting the Auger/Impeller Drive
Belt on page 20.
8
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 1028 Power Shift, Toro 1332 Power Shift, Toro 38547, Toro 38560, Toro 38592, Toro 924 Power Shift |
| Model Number | 38547, 38560 and 38592 |
| Model Year | 2002 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 220000001 - 220999999 |
| Product Name | Toro 924 Power Shift Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Two Stage Power Shift |
| Swath | 24 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | 26 oz. (.8l) 5w-30 or 10w / API SH or higher |
| Engine Motor Model # | OHSK90-221413C |
| Engine Motor Size | 9 hp |
| Engine Motor Type | 4 Cycle CARB1, EPA1 |
| Transmission Speed | 4 Forward/2 Reverse |
| Transmission Type | Gear |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)