Repair instructions
Centrifugal clutch – removal
Inspection and cleaning
1
Remove the cylinder cover. Disengage the chain
brake by pushing the kickback guard backwards.
Undo the guide bar bolts and remove the clutch
cover, chain and guide bar.
• Clean and inspect all parts carefully. If there are
any cracks or other defects replace the dam-
aged parts with new ones. Always use original
parts.
2
Min 65mm
•
Check the thickness of the clutch shoes by us-
ing vernier callipers to measure the diameter of
the clutch. If the diameter is less than 65 mm the
clutch assembly must be replaced.
Disconnect the HT lead. Remove the spark plug
and fit piston stop 502 54 15-01 in its place.
Centrifugal clutch – refitting
3
1
NOTE!
Handle the clutch springs carefully. If they
are opened up too much they could dam-
age the saw.
Unbolt the clutch using tool 502 54 16-01 and a
suitable socket or combination spanner. Turn the
nut clockwise to remove it.
4
NOTE!
Handle the clutch springs carefully. If they
are opened up too much they could dam-
age the saw.
Insert the clutch springs in the shoes using circlip
pliers.
Carefully prise out the clutch springs with a screw-
driver.
English – 27
| Categories | Chainsaw Manuals, Husqvarna Chainsaw Manuals |
|---|---|
| Tags | Husqvarna 340, Husqvarna 345, Husqvarna 346XP, Husqvarna 350, Husqvarna 351, Husqvarna 353 |
| Model Year | 2003, 2004, 2005, 2006 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Product Brand | Husqvarna, Chainsaw |
| Document File Type | |
| Publisher | husqvarna.com |
| Wikipedia's Page | Husqvarna |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)