Repair instructions
Adjustable oil pump – adjustment
346XP, 350, 351, 353
2
A
Use a screwdriver or adjustable spanner to turn
the adjuster screw on the pump. Turning the screw
clockwise decreases the oil flow and turning it anti-
clockwise increases the oil flow.
C
B
+
–
Disconnect the pushrod from the carburettor by
first carefully prising up the spring over the end of
the rod, where it connects to the throttle lever (A).
Then press the throttle lever forwards (B) while
pressing the throttle pushrod backwards (C) and
lifting it off the lever. Withdraw the throttle pushrod
from the tank and lift it upwards without pulling it
through the rubber inlet manifold. Carefully release
the carburettor assembly from the right-hand rub-
ber mounting and lift it upwards.
1
2
3
Recommended setting:
13–15"
15–18"
18–20"
bar
bar
bar
Min. setting
Midway setting
Max. setting
3
Carburettor – removal
1
Open the spring lock on the rubber bellows.
4
NOTE!
Do not use knurled pliers to disconnect
or reconnect the fuel hose. This could
damage the hose and lead to leakage or
fracture.
Remove the cylinder and air filter. Disconnect the
leads from the stop switch and the fuel hose from
the carburettor.
Undo and remove the carburettor bolts. Lift off the
carburettor.
English – 31
| Categories | Chainsaw Manuals, Husqvarna Chainsaw Manuals |
|---|---|
| Tags | Husqvarna 340, Husqvarna 345, Husqvarna 346XP, Husqvarna 350, Husqvarna 351, Husqvarna 353 |
| Model Year | 2003, 2004, 2005, 2006 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Product Brand | Husqvarna, Chainsaw |
| Document File Type | |
| Publisher | husqvarna.com |
| Wikipedia's Page | Husqvarna |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)